Research on Clock Circuit Electromagnetic Emission Test and Suppression

Bai Yijie; Wu Shengnan

doi:doi:10.11648/j.sd.20210904.13

| Peer-Reviewed

Research on Clock Circuit Electromagnetic Emission Test and Suppression

Bai Yijie, Wu Shengnan

Published in Science Discovery (Volume 9, Issue 4)

Received: 20 April 2021 Published: 4 June 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Clock circuit is an important part of PCB, which is usually composed of crystal oscillator, crystal oscillator control chip and capacitor. Electromagnetic emission generated by clock circuit is one of the main interference sources of electronic equipment. According to the different transmission paths, electromagnetic interference caused by clock circuit usually includes conduction interference and radiation interference. When the electromagnetic emission generated by the clock circuit reaches a certain degree, it may affect the electromagnetic compatibility of electronic equipment. In this paper, by analyzing the frequency spectrum characteristics of the clock signal, the difference of the frequency spectrum of the clock signal under different parameters is compared, and the electromagnetic emission test method is given. On this basis, when the EMI suppression method of clock circuit is studied, a series of EMC design methods of clock circuit are summarized, and the application of spread spectrum technology in clock circuit is proposed.

Published in	Science Discovery (Volume 9, Issue 4)
DOI	10.11648/j.sd.20210904.13
Page(s)	145-149
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Clock Circuit, Electromagnetic Emission, Interference Suppression, Spread Spectrum

References

[1]	谢如元,徐加征.某型通信产品电磁兼容改进案例分析[J].电子质量,2017(04):102-105+110.
[2]	谢如元,施佳林.PCB板时钟电路的电磁兼容设计[J].现代电子技术,2012,35(02):142-144+147.
[3]	范桢,欧阳典勇.时钟电路辐射骚扰与扩频技术[J].安全与电磁兼容,2007(01):35-37.
[4]	吴慎山,李美凤,吴东芳.时钟电路的电磁兼容研究与设计[J].河南师范大学学报(自然科学版),2009,37(01):155-157.
[5]	韩晓轩.利用扩频技术减少高速时钟电路的电磁干扰[J].电子质量,2008(06):94-96.
[6]	Michael Hsieh.时钟电路的电磁波干扰[J].世界电子元器件,2004(02):34-36.
[7]	国防科学技术工业委员会．军用设备和分系统电磁发射和敏感度要求与测量：GJB 151B—2013[S]．2013．
[8]	马敏.电磁兼容中辐射发射测试技术的研究 [J]. 电子设计工程,2017,25(10):125-127+131.
[9]	杨锋,姚铮.基于时钟扩频技术改善车载终端中频辐射骚扰[J].电子设计工程,2016,24(06):71-73+76.
[10]	姜黎.高速数模电路多时钟系统EMC设计[J].电子质量,2018(03):69-72+79.
[11]	杨溯. 高速展频时钟发生器的研究与设计[D].电子科技大学,2015.
[12]	刘峙峰. 高速数字时钟电路电磁辐射特性及应用研究[D].电子科技大学,2013.
[13]	Cavit Ozdalga.运用展频时钟产生技术降低硬盘机的电磁干扰[J].电子测试,2003(08):77-81.
[14]	石铭,王新安.展频时钟生成器的设计与仿真[J].微电子学与计算机,2007(04):72-75.
[15]	叶楷.10GHz展频锁相环研究与设计[D].重庆大学,2018.
[16]	郝国勇.展频技术在液晶显示EMC设计中的应用[J].河南科技,2017(05):142-143.

Cite This Article

Plain Text BibTeX RIS

APA Style

Bai Yijie, Wu Shengnan. (2021). Research on Clock Circuit Electromagnetic Emission Test and Suppression. Science Discovery, 9(4), 145-149. https://doi.org/10.11648/j.sd.20210904.13

Copy | Download

ACS Style

Bai Yijie; Wu Shengnan. Research on Clock Circuit Electromagnetic Emission Test and Suppression. Sci. Discov. 2021, 9(4), 145-149. doi: 10.11648/j.sd.20210904.13

Copy | Download

AMA Style

Bai Yijie, Wu Shengnan. Research on Clock Circuit Electromagnetic Emission Test and Suppression. Sci Discov. 2021;9(4):145-149. doi: 10.11648/j.sd.20210904.13

Copy | Download

@article{10.11648/j.sd.20210904.13,
  author = {Bai Yijie and Wu Shengnan},
  title = {Research on Clock Circuit Electromagnetic Emission Test and Suppression},
  journal = {Science Discovery},
  volume = {9},
  number = {4},
  pages = {145-149},
  doi = {10.11648/j.sd.20210904.13},
  url = {https://doi.org/10.11648/j.sd.20210904.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20210904.13},
  abstract = {Clock circuit is an important part of PCB, which is usually composed of crystal oscillator, crystal oscillator control chip and capacitor. Electromagnetic emission generated by clock circuit is one of the main interference sources of electronic equipment. According to the different transmission paths, electromagnetic interference caused by clock circuit usually includes conduction interference and radiation interference. When the electromagnetic emission generated by the clock circuit reaches a certain degree, it may affect the electromagnetic compatibility of electronic equipment. In this paper, by analyzing the frequency spectrum characteristics of the clock signal, the difference of the frequency spectrum of the clock signal under different parameters is compared, and the electromagnetic emission test method is given. On this basis, when the EMI suppression method of clock circuit is studied, a series of EMC design methods of clock circuit are summarized, and the application of spread spectrum technology in clock circuit is proposed.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Research on Clock Circuit Electromagnetic Emission Test and Suppression
AU  - Bai Yijie
AU  - Wu Shengnan
Y1  - 2021/06/04
PY  - 2021
N1  - https://doi.org/10.11648/j.sd.20210904.13
DO  - 10.11648/j.sd.20210904.13
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 145
EP  - 149
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20210904.13
AB  - Clock circuit is an important part of PCB, which is usually composed of crystal oscillator, crystal oscillator control chip and capacitor. Electromagnetic emission generated by clock circuit is one of the main interference sources of electronic equipment. According to the different transmission paths, electromagnetic interference caused by clock circuit usually includes conduction interference and radiation interference. When the electromagnetic emission generated by the clock circuit reaches a certain degree, it may affect the electromagnetic compatibility of electronic equipment. In this paper, by analyzing the frequency spectrum characteristics of the clock signal, the difference of the frequency spectrum of the clock signal under different parameters is compared, and the electromagnetic emission test method is given. On this basis, when the EMI suppression method of clock circuit is studied, a series of EMC design methods of clock circuit are summarized, and the application of spread spectrum technology in clock circuit is proposed.
VL  - 9
IS  - 4
ER  -

Copy | Download

Author Information

Bai Yijie

Beijing Aerospace Measurement & Control Corp., Beijing, China
Wu Shengnan

Tianjin 712 Communication Broadcasting Company, Tianjin, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Bai Yijie, Wu Shengnan. (2021). Research on Clock Circuit Electromagnetic Emission Test and Suppression. Science Discovery, 9(4), 145-149. https://doi.org/10.11648/j.sd.20210904.13

Copy | Download

ACS Style

Bai Yijie; Wu Shengnan. Research on Clock Circuit Electromagnetic Emission Test and Suppression. Sci. Discov. 2021, 9(4), 145-149. doi: 10.11648/j.sd.20210904.13

Copy | Download

AMA Style

Bai Yijie, Wu Shengnan. Research on Clock Circuit Electromagnetic Emission Test and Suppression. Sci Discov. 2021;9(4):145-149. doi: 10.11648/j.sd.20210904.13

Copy | Download

@article{10.11648/j.sd.20210904.13,
  author = {Bai Yijie and Wu Shengnan},
  title = {Research on Clock Circuit Electromagnetic Emission Test and Suppression},
  journal = {Science Discovery},
  volume = {9},
  number = {4},
  pages = {145-149},
  doi = {10.11648/j.sd.20210904.13},
  url = {https://doi.org/10.11648/j.sd.20210904.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20210904.13},
  abstract = {Clock circuit is an important part of PCB, which is usually composed of crystal oscillator, crystal oscillator control chip and capacitor. Electromagnetic emission generated by clock circuit is one of the main interference sources of electronic equipment. According to the different transmission paths, electromagnetic interference caused by clock circuit usually includes conduction interference and radiation interference. When the electromagnetic emission generated by the clock circuit reaches a certain degree, it may affect the electromagnetic compatibility of electronic equipment. In this paper, by analyzing the frequency spectrum characteristics of the clock signal, the difference of the frequency spectrum of the clock signal under different parameters is compared, and the electromagnetic emission test method is given. On this basis, when the EMI suppression method of clock circuit is studied, a series of EMC design methods of clock circuit are summarized, and the application of spread spectrum technology in clock circuit is proposed.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Research on Clock Circuit Electromagnetic Emission Test and Suppression
AU  - Bai Yijie
AU  - Wu Shengnan
Y1  - 2021/06/04
PY  - 2021
N1  - https://doi.org/10.11648/j.sd.20210904.13
DO  - 10.11648/j.sd.20210904.13
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 145
EP  - 149
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20210904.13
AB  - Clock circuit is an important part of PCB, which is usually composed of crystal oscillator, crystal oscillator control chip and capacitor. Electromagnetic emission generated by clock circuit is one of the main interference sources of electronic equipment. According to the different transmission paths, electromagnetic interference caused by clock circuit usually includes conduction interference and radiation interference. When the electromagnetic emission generated by the clock circuit reaches a certain degree, it may affect the electromagnetic compatibility of electronic equipment. In this paper, by analyzing the frequency spectrum characteristics of the clock signal, the difference of the frequency spectrum of the clock signal under different parameters is compared, and the electromagnetic emission test method is given. On this basis, when the EMI suppression method of clock circuit is studied, a series of EMC design methods of clock circuit are summarized, and the application of spread spectrum technology in clock circuit is proposed.
VL  - 9
IS  - 4
ER  -

Copy | Download