Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles

Samira Salehi; Masoud Delgosha; Soheil Sharifi

doi:doi:10.11648/j.optics.20140301.11

| Peer-Reviewed

Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles

Samira Salehi, Masoud Delgosha, Soheil Sharifi

Published in Optics (Volume 3, Issue 1)

Received: 27 November 2013 Published: 30 January 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Cu-nanoTiO2 composite coatings electroplated from copper sulfate bath were obtained and characterized.The paper presents the influence of the different pH of Cu– TiO2 coatings obtained at DC current density. The pHwere 0.5and2in electroplating bath.The surface morphology andcomposition of layers were studied by scanning electron microscopy (SEM) and EDX analysis.The influences of pH parameter on the thickness, grain size and surface morphology of coating were studied.

Published in	Optics (Volume 3, Issue 1)
DOI	10.11648/j.optics.20140301.11
Page(s)	1-4
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Optic, Surface, SEM, TiO2

References

[1]	Chwa Sang Ok, Klein Didier, TomaFilofteia Laura, Bertrand Ghislaine, LiaoHanlin, Coddet Christian, et al. Microstructure and mechanical properties ofplasma sprayed nano structured TiO2–Al composite coatings. Mater Des, Vol. 194, Issue. 2-3, pp. 215-224, 2005.
[2]	Li Mingxi, He Yizhu, Yuan Xiaomin, Zhang Shihong. Microstructure of Al2O3 nanocrystalline/cobalt-based alloy composite coatings by laser deposition. Mater Des, Vol. 27, Issue. 10, pp. 1114-1119, 2006.
[3]	Zhu Jianhua, Liu Lei, Zhao Haijun, Shen Bin, Hu Wenbin. Microstructure and performance of electroformed Cu/nano-SiC composite. Mater Des, Vol. 28, Issue. 6, pp. 1958-1962, 2007.
[4]	Aruna S.T., Bindu C.N., EzhilSelvi V., William Grips V.K., Rajam K.S., Synthesis andproperties of electrodeposited Ni/Ceria nano composite coatings. Surf. & Coat. Tech., Vol. 200, Issue. 24, pp. 6871-6880, 2006.
[5]	Zhou Y, Zhang H, Kian B. Friction and wear properties of the co-deposited Ni–SiC nanocomposite coating. Appl Surf Sci, Vol. 253, Issue. 20, pp. 8335-8339, 2007.
[6]	J. Li, Y. Sun, X. Sun and J. Qiao, Mechanical and Corrosion-resistance performance of electrodeposited titania-nickel nanocomposite coating, Surf. & Coat. Tech., Vol. 192, Issue. 2-3, pp. 331-335, 2005.
[7]	G. Cârâc, L. Benea, C. Iticescu, Th. Lampke, S. Steinhäuser and B. Wielage, Codeposition of cerium Oxide with Nickel and Cobalt: correlation Between Microstructure And Microhardness, Surf. Eng., Vo. 20, Issue. 5, pp. 353-359, 2004.
[8]	P. K. Jena, E. A. Brocchi, I. G. Solórzano and M. S. Motta, Identification of a third phase in Cu-Al2O3 nanocomposites prepared by chemical routes, Mat. Sc. and Eng., Vol. 371, Issue. 1-2, pp. 72-78, 2004.
[9]	Catalina Iticescu, Geta Carac, Olga Mitoseriu, Thomas Lampkt, Electrochemical deposition of composite coatings in copper matrix with TiO2 Nanoparticles, Revue Rou maine dechimie, 53(1), pp. 43-47, 2008.
[10]	Mohammad Saeed Hadavi, Soheil Sharifi, Somaye Jafari, The Size Effect of TiO2 Anatase Nanoparticles on Photon Correlation Spectroscopy, Soft Nanoscience Letters, 2, pp.77-80, 2012

Cite This Article

Plain Text BibTeX RIS

APA Style

Samira Salehi, Masoud Delgosha, Soheil Sharifi. (2014). Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles. Optics, 3(1), 1-4. https://doi.org/10.11648/j.optics.20140301.11

Copy | Download

ACS Style

Samira Salehi; Masoud Delgosha; Soheil Sharifi. Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles. Optics. 2014, 3(1), 1-4. doi: 10.11648/j.optics.20140301.11

Copy | Download

AMA Style

Samira Salehi, Masoud Delgosha, Soheil Sharifi. Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles. Optics. 2014;3(1):1-4. doi: 10.11648/j.optics.20140301.11

Copy | Download

@article{10.11648/j.optics.20140301.11,
  author = {Samira Salehi and Masoud Delgosha and Soheil Sharifi},
  title = {Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles},
  journal = {Optics},
  volume = {3},
  number = {1},
  pages = {1-4},
  doi = {10.11648/j.optics.20140301.11},
  url = {https://doi.org/10.11648/j.optics.20140301.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.optics.20140301.11},
  abstract = {Cu-nanoTiO2 composite coatings electroplated from copper sulfate bath were obtained and characterized.The paper presents the influence of the different pH of Cu– TiO2 coatings obtained at DC current density. The pHwere 0.5and2in electroplating bath.The surface morphology andcomposition of layers were studied by scanning electron microscopy (SEM) and EDX analysis.The influences of pH parameter on the thickness, grain size and surface morphology of coating were studied.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles
AU  - Samira Salehi
AU  - Masoud Delgosha
AU  - Soheil Sharifi
Y1  - 2014/01/30
PY  - 2014
N1  - https://doi.org/10.11648/j.optics.20140301.11
DO  - 10.11648/j.optics.20140301.11
T2  - Optics
JF  - Optics
JO  - Optics
SP  - 1
EP  - 4
PB  - Science Publishing Group
SN  - 2328-7810
UR  - https://doi.org/10.11648/j.optics.20140301.11
AB  - Cu-nanoTiO2 composite coatings electroplated from copper sulfate bath were obtained and characterized.The paper presents the influence of the different pH of Cu– TiO2 coatings obtained at DC current density. The pHwere 0.5and2in electroplating bath.The surface morphology andcomposition of layers were studied by scanning electron microscopy (SEM) and EDX analysis.The influences of pH parameter on the thickness, grain size and surface morphology of coating were studied.
VL  - 3
IS  - 1
ER  -

Copy | Download

Author Information

Samira Salehi

Department of Physics, University of Sistan and Baluchestan, 98135-674 Zahedan, Iran
Masoud Delgosha

Department of Physics, University of Sistan and Baluchestan, 98135-674 Zahedan, Iran
Soheil Sharifi

Department of Physics, Faculty of Sciences, Ferdowsi University of Mashhad, Mashhad 91775-1436, Iran

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Samira Salehi, Masoud Delgosha, Soheil Sharifi. (2014). Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles. Optics, 3(1), 1-4. https://doi.org/10.11648/j.optics.20140301.11

Copy | Download

ACS Style

Samira Salehi; Masoud Delgosha; Soheil Sharifi. Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles. Optics. 2014, 3(1), 1-4. doi: 10.11648/j.optics.20140301.11

Copy | Download

AMA Style

Samira Salehi, Masoud Delgosha, Soheil Sharifi. Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles. Optics. 2014;3(1):1-4. doi: 10.11648/j.optics.20140301.11

Copy | Download

@article{10.11648/j.optics.20140301.11,
  author = {Samira Salehi and Masoud Delgosha and Soheil Sharifi},
  title = {Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles},
  journal = {Optics},
  volume = {3},
  number = {1},
  pages = {1-4},
  doi = {10.11648/j.optics.20140301.11},
  url = {https://doi.org/10.11648/j.optics.20140301.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.optics.20140301.11},
  abstract = {Cu-nanoTiO2 composite coatings electroplated from copper sulfate bath were obtained and characterized.The paper presents the influence of the different pH of Cu– TiO2 coatings obtained at DC current density. The pHwere 0.5and2in electroplating bath.The surface morphology andcomposition of layers were studied by scanning electron microscopy (SEM) and EDX analysis.The influences of pH parameter on the thickness, grain size and surface morphology of coating were studied.},
 year = {2014}
}

Copy | Download

TY  - JOUR
T1  - Influence of pH on the Electrochemical Deposition of Composite Coatings in Copper Matrix with Tio2 Nanoparticles
AU  - Samira Salehi
AU  - Masoud Delgosha
AU  - Soheil Sharifi
Y1  - 2014/01/30
PY  - 2014
N1  - https://doi.org/10.11648/j.optics.20140301.11
DO  - 10.11648/j.optics.20140301.11
T2  - Optics
JF  - Optics
JO  - Optics
SP  - 1
EP  - 4
PB  - Science Publishing Group
SN  - 2328-7810
UR  - https://doi.org/10.11648/j.optics.20140301.11
AB  - Cu-nanoTiO2 composite coatings electroplated from copper sulfate bath were obtained and characterized.The paper presents the influence of the different pH of Cu– TiO2 coatings obtained at DC current density. The pHwere 0.5and2in electroplating bath.The surface morphology andcomposition of layers were studied by scanning electron microscopy (SEM) and EDX analysis.The influences of pH parameter on the thickness, grain size and surface morphology of coating were studied.
VL  - 3
IS  - 1
ER  -

Copy | Download