The mixture of tri-block polymer with microemulsion on surface is studied with AFM. The study the topography of surface shows with increase of concentration of polymer, the high distribution doesn’t change but the wide of size is increasing. Moreover, the mixture of AOT microemulsion with tri-block polymer was coated and drying on surface, is studied with AFM. The results shows, the high distribution parameter increase with increase of polymer concentration on microemulsion
Published in | Optics (Volume 2, Issue 6) |
DOI | 10.11648/j.optics.20130206.11 |
Page(s) | 67-70 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2014. Published by Science Publishing Group |
Optic, Surface, Surfactant, AFM
[1] | William J. Wadsworth, Shirin M. Giffin, Iain T. McKinnie, John C. Sharpe, Anthony D. Woolhouse, Timothy G. Haskell, and Gerald J. Smith,Thermal and Optical Properties of Polymer Hosts for Solid-State Dye Lasers.Applied Optics, Vol. 38, Issue 12, pp. 2504-2509 (1999) |
[2] | N. G. Sultanova,S. N. Kasarova,I. D. Nikolov ,Characterization of optical properties of optical polymers, Optical and Quantum Electronics March Volume 45, Issue 3, pp 221-232,(2013) |
[3] | N.G.Sultanova, S.N.Kasarova and I.D.Nikolov,Investigation of optical properties of thin polymer films , Journal of Physics: Conference Series, Volume 356, Issue 1, pp.012049-012054. (2012). |
[4] | S.Sharifi , M.amirkhani, M. R.mohammadi, M.Aliahmad, O. Marti,The effect of TBAC on the collective diffusion coefficient and morphology of AOT microemulsion at X = 6.7, Physics and Chemistry of Liquids Volume 51, Issue 4, PP 469-479 (2013) |
[5] | S.Sharifi, O. Marti ,S. S. Funari,M.Amirkhani,The Effect of Different Polymer Length on Water Droplets of Reverse AOT microemulsion,Physics and Chemistry of Liquids (accepted 2013) |
[6] | S.Sharifi, G. V. Jensen, J.S. Pedersen, O.Marti,M.Amirkhani, The Mixture of Poly( Propylene-Glycol)-Block-Poly(Ethylene-Glycol)-Block-PPG With C12E5 Microemulsion, Physics and Chemistry of Liquids(accepted 2013) |
[7] | S.Sharifi, M.Amirkhani, O.Marti, The modeling and study of depletion interaction at mixture of C12E5 microemulsion with polyethylene glycol polymer, Soft Nanoscience Letters, 2, 77-80 (2012) |
[8] | S.N. Magonov, D.H. Reneker, CHARACTERIZATION OF POLYMER SURFACES WITH ATOMIC FORCE MICROSCOPY, Annu. Rev. Mater. Sci. 27:175–222(1997) |
[9] | M.Ibn-Elhaj and M.Schadt,Optical polymer thin films with isotropic and anisotropic nano-corrugated surface topologies, Nature 410, 796-799(12 April 2001) |
[10] | P. Cyganik, A. Budkowski, J. Raczkowska, Z. Postawa, AFM/LFM surface studies of a ternary polymer blend caston substrates covered by a self-assembled monolayer, Surface Science Vol.507–510,pp. 700–706(2002). |
[11] | Serr, A.; Netz, R. R, Pulling adsorbed polymers from surfaces with the AFM: stick vs. slip, peeling vs. gliding, Europhysics Letters, Volume 73, Issue 2, pp. 292-298 (2006). |
[12] | A.Nasrollahi, S.Sharifi, M.Aliahmad, Physics and Chemistry of Liquids (submitted 2013) |
APA Style
Soheil Sharifi, Esmaeil Doodman, Ahmadreza Daraei. (2014). The Effect of Mixture of AOT Microemulsion with PEG-PPG-PEG Tri-Block Polymer on Surface. Optics, 2(6), 67-70. https://doi.org/10.11648/j.optics.20130206.11
ACS Style
Soheil Sharifi; Esmaeil Doodman; Ahmadreza Daraei. The Effect of Mixture of AOT Microemulsion with PEG-PPG-PEG Tri-Block Polymer on Surface. Optics. 2014, 2(6), 67-70. doi: 10.11648/j.optics.20130206.11
AMA Style
Soheil Sharifi, Esmaeil Doodman, Ahmadreza Daraei. The Effect of Mixture of AOT Microemulsion with PEG-PPG-PEG Tri-Block Polymer on Surface. Optics. 2014;2(6):67-70. doi: 10.11648/j.optics.20130206.11
@article{10.11648/j.optics.20130206.11, author = {Soheil Sharifi and Esmaeil Doodman and Ahmadreza Daraei}, title = {The Effect of Mixture of AOT Microemulsion with PEG-PPG-PEG Tri-Block Polymer on Surface}, journal = {Optics}, volume = {2}, number = {6}, pages = {67-70}, doi = {10.11648/j.optics.20130206.11}, url = {https://doi.org/10.11648/j.optics.20130206.11}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.optics.20130206.11}, abstract = {The mixture of tri-block polymer with microemulsion on surface is studied with AFM. The study the topography of surface shows with increase of concentration of polymer, the high distribution doesn’t change but the wide of size is increasing. Moreover, the mixture of AOT microemulsion with tri-block polymer was coated and drying on surface, is studied with AFM. The results shows, the high distribution parameter increase with increase of polymer concentration on microemulsion}, year = {2014} }
TY - JOUR T1 - The Effect of Mixture of AOT Microemulsion with PEG-PPG-PEG Tri-Block Polymer on Surface AU - Soheil Sharifi AU - Esmaeil Doodman AU - Ahmadreza Daraei Y1 - 2014/01/30 PY - 2014 N1 - https://doi.org/10.11648/j.optics.20130206.11 DO - 10.11648/j.optics.20130206.11 T2 - Optics JF - Optics JO - Optics SP - 67 EP - 70 PB - Science Publishing Group SN - 2328-7810 UR - https://doi.org/10.11648/j.optics.20130206.11 AB - The mixture of tri-block polymer with microemulsion on surface is studied with AFM. The study the topography of surface shows with increase of concentration of polymer, the high distribution doesn’t change but the wide of size is increasing. Moreover, the mixture of AOT microemulsion with tri-block polymer was coated and drying on surface, is studied with AFM. The results shows, the high distribution parameter increase with increase of polymer concentration on microemulsion VL - 2 IS - 6 ER -