Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning

Muluken Jemberie; Sampath Rangaraj

doi:doi:10.11648/j.ajasr.20210704.11

| Peer-Reviewed

Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning

Muluken Jemberie, Sampath Rangaraj

Published in American Journal of Applied Scientific Research (Volume 7, Issue 4)

Received: 29 September 2021 Accepted: 20 October 2021 Published: 28 October 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Spinning triangle is a critical area that influences the physical and mechanical properties of yarn. Previous researchers have done several works related to spinning triangle by modifying yarn path primarily considering only one side diagonal yarn path meaning that either left or right diagonal yarn path. The others used single yarn count and twist level on different variety of raw materials. This research was produced cotton ring yarns by varying count (36 Ne, 40 Ne) and twist level (1014 TPM, 1080 TPM) using right and left diagonal paths in Z-twist direction. The yarns were tested and it was observed that 25%, 0.34%, 37% and 25% reduction in hairiness, CVm%, thin place and thick place respectively with slight decreasing of tenacity in left diagonal path yarn. In right diagonal path yarn there is 3%, 16%, 59% and 14% increasing of yarn hairiness, CVm%, thin place and thick place respectively with 10% reduction of tenacity. Therefore, the left diagonal path has a significant improvement of ring spun yarn quality in terms of physical properties. On the other hand, the right diagonal path yarn were deteriorated all the physical and tensile properties of ring spun yarn. This is occurring due to the mismatching of right diagonal path with Z-twist direction.

Published in	American Journal of Applied Scientific Research (Volume 7, Issue 4)
DOI	10.11648/j.ajasr.20210704.11
Page(s)	77-83
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Ring Spinning, Spinning Triangle, Left Diagonal Path, Right Diagonal Path

References

[1]	A. Demirel and T. Öktem, "A comparative study of the characteristics of compact yarn-based knitted fabrics," Fibres & Textiles in Eastern Europe, vol. 13, p. 50, 2005.
[2]	L. Cheng, P. Fu, and X. Yu, "Relationship between hairiness and the twisting principles of solospun and ring spun yarns," Textile Research Journal, vol. 74, pp. 763-766, 2004.
[3]	J. Feng, B. G. Xu, X. M. Tao, and T. Hua, "Theoretical study of a spinning triangle with its application in a modified ring spinning system," Textile Research Journal, vol. 80, pp. 1456-1464, 2010.
[4]	X. Liu, X. Liu, and X. Su, "Theoretical study on a spinning triangle with fiber superposition," Textile Research Journal, vol. 85, pp. 1541-1552, 2015.
[5]	K. Cheng and C. Yu, "A study of compact spun yarns," Textile Research Journal, vol. 73, pp. 345-349, 2003.
[6]	X. Liu and X. Su, "Theoretical study of effect of ring spinning triangle division on fiber tension distribution," Journal of Engineered Fibers and Fabrics, vol. 10, p. 155892501501000314, 2015.
[7]	T. Hua, X. M. Tao, K. P. S. Cheng, and B. G. Xu, "Effects of geometry of ring spinning triangle on yarn torque part I: Analysis of fiber tension distribution," Textile Research Journal, vol. 77, pp. 853-863, 2007.
[8]	T. Hua, X. M. Tao, K. P. S. Cheng, and B. G. Xu, "Effects of geometry of ring spinning triangle on yarn torque: Part II: Distribution of fiber tension within a yarn and its effects on yarn residual torque," Textile Research Journal, vol. 80, pp. 116-123, 2010.
[9]	M. Sun and K. Cheng, "Structure and properties of cotton Sirospun® yarn," Textile Research Journal, vol. 70, pp. 261-268, 2000.
[10]	S. S. Najar, Z. Khan, and X. Wang, "The new Solo-Siro spun process for worsted yarns," Journal of the Textile Institute, vol. 97, pp. 205-210, 2006.
[11]	X. Wang and L. Chang, "Reducing yarn hairiness with a modified yam path in worsted ring spinning," Textile research journal, vol. 73, pp. 327-332, 2003.
[12]	H. Dou and S. Liu, "Trajectories of fibers and analysis of yarn quality for compact spinning with pneumatic groove," Journal of the Textile Institute, vol. 102, pp. 713-718, 2011.
[13]	P. Çelik and H. Kadoglu, "A research on the compact spinning for long staple yarns," Fibres & Textiles in Eastern Europe, vol. 12, p. 48, 2004.
[14]	T. Jackowski, "The 9th International Cotton Conference," 2003.
[15]	M. F. Khurshid, K. Nadeem, M. Asad, M. A. Chaudhry, and M. Amanullah, "Comparative analysis of cotton yarn properties spun on pneumatic compact spinning systems," Fibres & Textiles in Eastern Europe, 2013.
[16]	X. Su, W. Gao, X. Liu, C. Xie, and B. Xu, "Research on the compact-siro spun yarn structure," Fibres & Textiles in Eastern Europe, 2015.
[17]	H.-C. Ma, L.-D. Cheng, G.-X. Yan, and S.-P. Xu, "Studies of negative pressure and cleaning condition effects on gathering for ramie compact spinning with a suction groove," Fibres & Textiles in Eastern Europe, 2014.
[18]	Z. Xia and W. Xu, "A review of ring staple yarn spinning method development and its trend prediction," Journal of Natural Fibers, vol. 10, pp. 62-81, 2013.
[19]	S. Canoglu and S. M. Yukseloglu, "Hairiness values of the polyester/viscose ring-spun yarn blends," Fibres & Textiles in Eastern Europe, vol. 16, pp. 34-38, 2008.
[20]	I. Usta and S. Canoglu, "Influence of ring traveller weight and coating on hairiness of acrylic and cotton yarns," 2003.
[21]	X. Liu and X. Su, "Research on fiber tension at asymmetric spinning triangle using the finite-element method," The Journal of The Textile Institute, vol. 107, pp. 200-207, 2016.
[22]	X. Z. Su, W. D. Gao, T. T. Wu, X. J. Liu, and Y. Zhang, "Reducing yarn hairiness in a modified ring spinning yarn path by various offsets," in Advanced Materials Research, 2011, pp. 493-497.
[23]	G. Thilagavathi, G. Gukanathan, and B. Munusamy, "Yarn hairiness controlled by modified yarn path in cotton ring spinning," 2005.
[24]	T. Wu, C. Xie, X. Su, X. Liu, and B. Huang, "A modified ring spinning system with various diagonal yarn path offsets," Procedia Engineering, vol. 18, pp. 1-6, 2011.
[25]	A. J. Rajwin, C. Prakash, and J. T. Vimal, "Effect of diagonal path on the physical properties of compact and conventional ring yarn," 2018.

Cite This Article

Plain Text BibTeX RIS

APA Style

Muluken Jemberie, Sampath Rangaraj. (2021). Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning. American Journal of Applied Scientific Research, 7(4), 77-83. https://doi.org/10.11648/j.ajasr.20210704.11

Copy | Download

ACS Style

Muluken Jemberie; Sampath Rangaraj. Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning. Am. J. Appl. Sci. Res. 2021, 7(4), 77-83. doi: 10.11648/j.ajasr.20210704.11

Copy | Download

AMA Style

Muluken Jemberie, Sampath Rangaraj. Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning. Am J Appl Sci Res. 2021;7(4):77-83. doi: 10.11648/j.ajasr.20210704.11

Copy | Download

@article{10.11648/j.ajasr.20210704.11,
  author = {Muluken Jemberie and Sampath Rangaraj},
  title = {Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning},
  journal = {American Journal of Applied Scientific Research},
  volume = {7},
  number = {4},
  pages = {77-83},
  doi = {10.11648/j.ajasr.20210704.11},
  url = {https://doi.org/10.11648/j.ajasr.20210704.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajasr.20210704.11},
  abstract = {Spinning triangle is a critical area that influences the physical and mechanical properties of yarn. Previous researchers have done several works related to spinning triangle by modifying yarn path primarily considering only one side diagonal yarn path meaning that either left or right diagonal yarn path. The others used single yarn count and twist level on different variety of raw materials. This research was produced cotton ring yarns by varying count (36 Ne, 40 Ne) and twist level (1014 TPM, 1080 TPM) using right and left diagonal paths in Z-twist direction. The yarns were tested and it was observed that 25%, 0.34%, 37% and 25% reduction in hairiness, CVm%, thin place and thick place respectively with slight decreasing of tenacity in left diagonal path yarn. In right diagonal path yarn there is 3%, 16%, 59% and 14% increasing of yarn hairiness, CVm%, thin place and thick place respectively with 10% reduction of tenacity. Therefore, the left diagonal path has a significant improvement of ring spun yarn quality in terms of physical properties. On the other hand, the right diagonal path yarn were deteriorated all the physical and tensile properties of ring spun yarn. This is occurring due to the mismatching of right diagonal path with Z-twist direction.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning
AU  - Muluken Jemberie
AU  - Sampath Rangaraj
Y1  - 2021/10/28
PY  - 2021
N1  - https://doi.org/10.11648/j.ajasr.20210704.11
DO  - 10.11648/j.ajasr.20210704.11
T2  - American Journal of Applied Scientific Research
JF  - American Journal of Applied Scientific Research
JO  - American Journal of Applied Scientific Research
SP  - 77
EP  - 83
PB  - Science Publishing Group
SN  - 2471-9730
UR  - https://doi.org/10.11648/j.ajasr.20210704.11
AB  - Spinning triangle is a critical area that influences the physical and mechanical properties of yarn. Previous researchers have done several works related to spinning triangle by modifying yarn path primarily considering only one side diagonal yarn path meaning that either left or right diagonal yarn path. The others used single yarn count and twist level on different variety of raw materials. This research was produced cotton ring yarns by varying count (36 Ne, 40 Ne) and twist level (1014 TPM, 1080 TPM) using right and left diagonal paths in Z-twist direction. The yarns were tested and it was observed that 25%, 0.34%, 37% and 25% reduction in hairiness, CVm%, thin place and thick place respectively with slight decreasing of tenacity in left diagonal path yarn. In right diagonal path yarn there is 3%, 16%, 59% and 14% increasing of yarn hairiness, CVm%, thin place and thick place respectively with 10% reduction of tenacity. Therefore, the left diagonal path has a significant improvement of ring spun yarn quality in terms of physical properties. On the other hand, the right diagonal path yarn were deteriorated all the physical and tensile properties of ring spun yarn. This is occurring due to the mismatching of right diagonal path with Z-twist direction.
VL  - 7
IS  - 4
ER  -

Copy | Download

Author Information

Muluken Jemberie

Department of Textile Engineering, Hawassa Institute of Technology, Hawassa, Ethiopia
Sampath Rangaraj

Department of Textile Engineering, Bahir Dar University, Bahir Dar, Ethiopia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Muluken Jemberie, Sampath Rangaraj. (2021). Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning. American Journal of Applied Scientific Research, 7(4), 77-83. https://doi.org/10.11648/j.ajasr.20210704.11

Copy | Download

ACS Style

Muluken Jemberie; Sampath Rangaraj. Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning. Am. J. Appl. Sci. Res. 2021, 7(4), 77-83. doi: 10.11648/j.ajasr.20210704.11

Copy | Download

AMA Style

Muluken Jemberie, Sampath Rangaraj. Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning. Am J Appl Sci Res. 2021;7(4):77-83. doi: 10.11648/j.ajasr.20210704.11

Copy | Download

@article{10.11648/j.ajasr.20210704.11,
  author = {Muluken Jemberie and Sampath Rangaraj},
  title = {Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning},
  journal = {American Journal of Applied Scientific Research},
  volume = {7},
  number = {4},
  pages = {77-83},
  doi = {10.11648/j.ajasr.20210704.11},
  url = {https://doi.org/10.11648/j.ajasr.20210704.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajasr.20210704.11},
  abstract = {Spinning triangle is a critical area that influences the physical and mechanical properties of yarn. Previous researchers have done several works related to spinning triangle by modifying yarn path primarily considering only one side diagonal yarn path meaning that either left or right diagonal yarn path. The others used single yarn count and twist level on different variety of raw materials. This research was produced cotton ring yarns by varying count (36 Ne, 40 Ne) and twist level (1014 TPM, 1080 TPM) using right and left diagonal paths in Z-twist direction. The yarns were tested and it was observed that 25%, 0.34%, 37% and 25% reduction in hairiness, CVm%, thin place and thick place respectively with slight decreasing of tenacity in left diagonal path yarn. In right diagonal path yarn there is 3%, 16%, 59% and 14% increasing of yarn hairiness, CVm%, thin place and thick place respectively with 10% reduction of tenacity. Therefore, the left diagonal path has a significant improvement of ring spun yarn quality in terms of physical properties. On the other hand, the right diagonal path yarn were deteriorated all the physical and tensile properties of ring spun yarn. This is occurring due to the mismatching of right diagonal path with Z-twist direction.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Study on the Properties of Cotton Yarn with Modified Yarn Path in Ring Spinning
AU  - Muluken Jemberie
AU  - Sampath Rangaraj
Y1  - 2021/10/28
PY  - 2021
N1  - https://doi.org/10.11648/j.ajasr.20210704.11
DO  - 10.11648/j.ajasr.20210704.11
T2  - American Journal of Applied Scientific Research
JF  - American Journal of Applied Scientific Research
JO  - American Journal of Applied Scientific Research
SP  - 77
EP  - 83
PB  - Science Publishing Group
SN  - 2471-9730
UR  - https://doi.org/10.11648/j.ajasr.20210704.11
AB  - Spinning triangle is a critical area that influences the physical and mechanical properties of yarn. Previous researchers have done several works related to spinning triangle by modifying yarn path primarily considering only one side diagonal yarn path meaning that either left or right diagonal yarn path. The others used single yarn count and twist level on different variety of raw materials. This research was produced cotton ring yarns by varying count (36 Ne, 40 Ne) and twist level (1014 TPM, 1080 TPM) using right and left diagonal paths in Z-twist direction. The yarns were tested and it was observed that 25%, 0.34%, 37% and 25% reduction in hairiness, CVm%, thin place and thick place respectively with slight decreasing of tenacity in left diagonal path yarn. In right diagonal path yarn there is 3%, 16%, 59% and 14% increasing of yarn hairiness, CVm%, thin place and thick place respectively with 10% reduction of tenacity. Therefore, the left diagonal path has a significant improvement of ring spun yarn quality in terms of physical properties. On the other hand, the right diagonal path yarn were deteriorated all the physical and tensile properties of ring spun yarn. This is occurring due to the mismatching of right diagonal path with Z-twist direction.
VL  - 7
IS  - 4
ER  -

Copy | Download