International Journal of Economy, Energy and Environment

| Peer-Reviewed |

TSP, PM10 and PM2.5 Distribution Characteristics in the Thermal Power Plants in Korea

Received: Apr. 12, 2019    Accepted: May 31, 2019    Published: Aug. 10, 2019
Views:       Downloads:

Share This Article

Abstract

In this study, the emission characteristics and heavy metal contents of TSP, PM10 and PM2.5 pollutants from three thermal power plants in Korea were investigated and compared to the electric production capacity, type of fuel and sort of air-pollution-control device. For the measurement and analysis, Korean standard test method US EPA method were used. The average concentration of TSP, PM10 and PM2.5 emitted from Plant A were 7.39, 6.16, 4.83 mg/Sm3, Plant B was 5.82, 4.87, 2.35 mg/Sm3 and Plant C was 1.54, 1.40, 10.02 mg/Sm3, respectively. Plant A that uses heavy oil as the main fuel showed higher TSP, PM10 and PM2.5 than Plant B that uses mostly anthracite coal, and plant B showed higher TSP, PM10 and PM2.5 than Plant C that mainly uses bituminous coal. The concentration of fine particles decreased as electricity-production capacity increased. The fractions of PM10 and PM2.5 in TSP were relatively high in tested plants; this result means that more fine particles than coarse particles were emitted from all stacks. The distribution of heavy metals by particle size showed similar trends in all plants. The concentration of Zn and Mn in TSP, PM10 and PM2.5 showed higher than the others in all plants. These results confirm that the content of heavy metals in the particulate matter is influenced by the fuel that the plant uses.

DOI 10.11648/j.ijeee.20190404.11
Published in International Journal of Economy, Energy and Environment ( Volume 4, Issue 4, August 2019 )
Page(s) 63-70
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Emission, TSP, PM10, PM2.5, Fuel, Heavy Metals, Thermal Power Plant

References
[1] Ministry of Environment (MEO), 2017. Framework Act on Environment Policy, Korea.
[2] Ministry of Environment (MEO), 2015(a). Annual Environmental Report, Korea.
[3] US EPA, 2012. National Ambient Air Quality Standards.
[4] European Environment Agency, 2008. Directive 2008/50 / EC.
[5] World Health Organization (WHO), 2005. Air Quality Guidelines for Particulate Matter, Ozone, Nitrogen dioxide and Sulfur dioxide.
[6] Katsouyanni K., Touloumi G., Samoli E., Gryparis A., Tertre A., Monopolis Y., Rossi G., Ballester F., Boumghar A., Anderson R., Wojtyniak B., Paldy A., Braunstein R., Pekkanen J., Schindler C. and Schwartz J., 2001. Confounding and effect modification in short-term effects of ambient particles on total mortality-results from 29 European cities within the APHEA2 project”, Epidemiology, 12, 521-531.
[7] Cohen A and Ezzat M, 2004. Mortality impacts of urban pollution-Comparative quantification of health risks: global and regional burden of disease attributable to selected major risk factors, Geneva, World Health Organization, 1352-1434.
[8] Smith K. R., Veranth J. M., Hu A. A., Lighty J. S. and Aust A. E., 2000. Interleukin-8 levels in human lung epitkeial cells are increased in response to coal fly ash and vary with the bioavailability of iron, as a function of particle Size and source of coal, Chem. Res. Toxicol, 13, 118-125.
[9] Dockery O. W., Pope C. A. and Xu X., 1993. An association between air pollution and mortality in six U. S. cities, New England Journal of Medicine, 329, 1753-175.
[10] Health Effects Institute, 2000. Reanalysis of Harvard Six-Cities study and American Cancer Society study of particulate air pollution and mortality: A special report of the institute's epidemiology reanalysis project, Cambridge, MA.
[11] Pope C. A, Dockery M. L. and Long R. W., 2002. Lung cancer, cardiopulmonary mortality and long-term exposure to fine particulate air pollution, Journal of the American Medical Association, 287, 1132-1141.
[12] Jo S. Y., Sun W. Y. and Joung Y. W., 2012. PM2.5 abatement effect analysis Establish future management policy roadmap. Korean National Institute of Environmental Research, NIER N029280, National Institute of Environmental Research, Korea.
[13] http://sodac.nier.go.kr, 2014. Source of Emission Statistics, National Institute of Environmental Research, Korea.
[14] Smith I. M. and Sloss L. L., 1998. PM10/2.5-emission and effects. IEA coal research report, London.
[15] England G. C., Zielinska B. and Loss K., 2000. Characterizing PM2.5 emission profiles foe stationary source-comparison of traditional and dilution sampling techniques. Fuel Proce. Technol. 65-66, 177-188.
[16] Sloss L. L., 2004. The importance of PM10/2.5 emission. IEA Clean Coal Centre report, London.
[17] Soud H. N and Wu Z., 2000. East Asia-air pollution control and coal fired power generation. IEA coal research report, London.
[18] Ehrlich C., Noll G., Kalkoff W. D., Baumbach G. and Dreiseidler A., 2007. PM10, PM2.5 and PM1.0-Emissions from industrial plants-Results from measurement programmes in Germany. Atmospheric Environment 41, 6236-6254.
[19] Korean Standard Test Method (KSTM), 2015(b). ES 01112.1 - Method for collecting particulate matter from exhaust gas, Ministry of Environment, Korea.
[20] Korean Standard Test Method (KSTM), 2015 (c). ES 01317.1a - Method for collecting fine dust (PM10 and PM2.5) in exhaust gas, Ministry of Environment, Korea.
[21] US EPA Method 201A, 2008. Determining PM10 and PM2.5 Emission from Stationary Source, USA.
[22] Ministry of Environment (MOE), 2015 (d). Air Environment Conservation Act, Korea.
[23] US EPA Method 3051A, 2007. MICROWAVE ASSISTED ACID DIGESTION OF SEDIMENTS, SLUDGES, SOILS, AND OILS, USA.
[24] US EPA Method 200.8, Revision 5.4, 1996. Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma – Mass Spectrometry, USA.
[25] Han J. S., Choi S. W., Kim J. E., Kim Y. L, Kim B. K., Hong T. G., Han K. B., Lee S. K. and Kim H. W., 2011. Environmental Test and Inspection QA/QC Handbook (2nd edition), NIER NO. 2011-08-1294, National Institute of Environmental Research, Korea.
[26] Song G. J., Kyeong J. K., Moon Y. H., Joo J. H and Lee A. Y., 2009. A Study on the Establishing the Speciate of the Air Pollutants from Anthropogenic Sources in Korea (II), NIER-N022886, National Institute of Environmental Research, Korea.
[27] Han J. S., Jang K. W., Jung N., Kim H. C., Kim M. S., Song D. J., Kim S. K. and Hong J. Y., 2010. A Study on the Establishing the Speciate of the Air Pollutants from Anthropogenic Sources in Korea (III), NIER NO 2010-93-1268, National Institute of Environmental Research, Korea.
[28] Joung Y. W., Jeoun K. J., Han S. H, Uu M. K., Lee J. H., Kim H. L., An S. K., Kim B. J., Lee H, K., Lee T. H. and Kang J. W., 2013. A Study on the Speciation and the Control Measures of PM2.5 from Large Stationary Emission Source (I), NIER-SP2013-206, National Institute of Environmental Research, Korea.
[29] Joung Y. W., Jeoun K. J., Han S. H, Lee J. M., Song J. M., Kim H. L., Lee J. H., An S. K., Song M. S., Kyang S. M., Kim B. J. and Kim D. K., 2014. A Study on the Speciation and the Control Measures of PM2.5 from Large Stationary Emission Source (II), NIER-SP2014-206, National Institute of Environmental Research, Korea.
[30] Pio C. A., Nunes T. V., Borrego C. A., Martins J., 1989. Assessment of air pollution sources in an industrial atmosphere using principal component/multilinear regression analysis. Science of the Total Environment 80, 279-292.
[31] Pio C. A., Castro L. H., Cerqueira M. A., Santos I. M., Belchior F., Salgueiro M. L., 1996. Source assessment of particulate air pollutants measured at the south-west European. Atmospheric Environment 30, 3309-3320.
[32] Querol X., Viana M., Alstuey A., Amato F., Moreno T., Castillo S., Pey J., de la Rosa J., A. Sanchez A., Artinano B., Salvador P., Garcia Dos Santos S., Fernandez-Patier R., Moreno-Grau S., Negral L., Minguillon M. C., Monfort E., Gil J. I., Inza A., Ortega L. A., Santamaria J. M., Zabalza J., 2007. Source origin of trace elements in PM from regional background, urban and industrial sites of Spain. Atmospheric Environment 41, 7219-7231.
Cite This Article
  • APA Style

    Geum-Ju Song, Young-Hoon Moon, Jong-Ho Joo, A-Yeoung Lee, Jae-Bok Lee. (2019). TSP, PM10 and PM2.5 Distribution Characteristics in the Thermal Power Plants in Korea. International Journal of Economy, Energy and Environment, 4(4), 63-70. https://doi.org/10.11648/j.ijeee.20190404.11

    Copy | Download

    ACS Style

    Geum-Ju Song; Young-Hoon Moon; Jong-Ho Joo; A-Yeoung Lee; Jae-Bok Lee. TSP, PM10 and PM2.5 Distribution Characteristics in the Thermal Power Plants in Korea. Int. J. Econ. Energy Environ. 2019, 4(4), 63-70. doi: 10.11648/j.ijeee.20190404.11

    Copy | Download

    AMA Style

    Geum-Ju Song, Young-Hoon Moon, Jong-Ho Joo, A-Yeoung Lee, Jae-Bok Lee. TSP, PM10 and PM2.5 Distribution Characteristics in the Thermal Power Plants in Korea. Int J Econ Energy Environ. 2019;4(4):63-70. doi: 10.11648/j.ijeee.20190404.11

    Copy | Download

  • @article{10.11648/j.ijeee.20190404.11,
      author = {Geum-Ju Song and Young-Hoon Moon and Jong-Ho Joo and A-Yeoung Lee and Jae-Bok Lee},
      title = {TSP, PM10 and PM2.5 Distribution Characteristics in the Thermal Power Plants in Korea},
      journal = {International Journal of Economy, Energy and Environment},
      volume = {4},
      number = {4},
      pages = {63-70},
      doi = {10.11648/j.ijeee.20190404.11},
      url = {https://doi.org/10.11648/j.ijeee.20190404.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijeee.20190404.11},
      abstract = {In this study, the emission characteristics and heavy metal contents of TSP, PM10 and PM2.5 pollutants from three thermal power plants in Korea were investigated and compared to the electric production capacity, type of fuel and sort of air-pollution-control device. For the measurement and analysis, Korean standard test method US EPA method were used. The average concentration of TSP, PM10 and PM2.5 emitted from Plant A were 7.39, 6.16, 4.83 mg/Sm3, Plant B was 5.82, 4.87, 2.35 mg/Sm3 and Plant C was 1.54, 1.40, 10.02 mg/Sm3, respectively. Plant A that uses heavy oil as the main fuel showed higher TSP, PM10 and PM2.5 than Plant B that uses mostly anthracite coal, and plant B showed higher TSP, PM10 and PM2.5 than Plant C that mainly uses bituminous coal. The concentration of fine particles decreased as electricity-production capacity increased. The fractions of PM10 and PM2.5 in TSP were relatively high in tested plants; this result means that more fine particles than coarse particles were emitted from all stacks. The distribution of heavy metals by particle size showed similar trends in all plants. The concentration of Zn and Mn in TSP, PM10 and PM2.5 showed higher than the others in all plants. These results confirm that the content of heavy metals in the particulate matter is influenced by the fuel that the plant uses.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - TSP, PM10 and PM2.5 Distribution Characteristics in the Thermal Power Plants in Korea
    AU  - Geum-Ju Song
    AU  - Young-Hoon Moon
    AU  - Jong-Ho Joo
    AU  - A-Yeoung Lee
    AU  - Jae-Bok Lee
    Y1  - 2019/08/10
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ijeee.20190404.11
    DO  - 10.11648/j.ijeee.20190404.11
    T2  - International Journal of Economy, Energy and Environment
    JF  - International Journal of Economy, Energy and Environment
    JO  - International Journal of Economy, Energy and Environment
    SP  - 63
    EP  - 70
    PB  - Science Publishing Group
    SN  - 2575-5021
    UR  - https://doi.org/10.11648/j.ijeee.20190404.11
    AB  - In this study, the emission characteristics and heavy metal contents of TSP, PM10 and PM2.5 pollutants from three thermal power plants in Korea were investigated and compared to the electric production capacity, type of fuel and sort of air-pollution-control device. For the measurement and analysis, Korean standard test method US EPA method were used. The average concentration of TSP, PM10 and PM2.5 emitted from Plant A were 7.39, 6.16, 4.83 mg/Sm3, Plant B was 5.82, 4.87, 2.35 mg/Sm3 and Plant C was 1.54, 1.40, 10.02 mg/Sm3, respectively. Plant A that uses heavy oil as the main fuel showed higher TSP, PM10 and PM2.5 than Plant B that uses mostly anthracite coal, and plant B showed higher TSP, PM10 and PM2.5 than Plant C that mainly uses bituminous coal. The concentration of fine particles decreased as electricity-production capacity increased. The fractions of PM10 and PM2.5 in TSP were relatively high in tested plants; this result means that more fine particles than coarse particles were emitted from all stacks. The distribution of heavy metals by particle size showed similar trends in all plants. The concentration of Zn and Mn in TSP, PM10 and PM2.5 showed higher than the others in all plants. These results confirm that the content of heavy metals in the particulate matter is influenced by the fuel that the plant uses.
    VL  - 4
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Institute of Environmental and Energy Technology, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea

  • Institute of Environmental and Energy Technology, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea

  • Institute of Environmental and Energy Technology, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea

  • Institute of Environmental and Energy Technology, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea

  • Institute of Environmental and Energy Technology, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea

  • Section