| Peer-Reviewed

Physico-chemical Study of Effluents of Pharmaceutical Industries of Hyderabad Division Sindh Pakistan

Received: 13 June 2017    Accepted: 4 July 2017    Published: 31 July 2017
Views:       Downloads:
Abstract

The Pakistan Pharmaceutical Industry is one of indispensable industries of this country. This industry manufactures very important life saving as well as life-enhancing medicines. This industry produces a wide variety of chemical products which are consist of antibiotics, analgesics, disinfectants, anesthetics, muscle relaxants, water soluble salts,, anti-clotting agents, cardiovascular medicines and vitamin in different forms like tablets, capsules, ampoules, syrups. This industry plays the role of life saving institute. At the same time this huge industry has been witnessed a source of liquid pollution, if run without treatment plant or proper disposable measures. Present study of effluents of selected Pharmaceutical industries of Hyderabad Division was conducted. Total five industries were brought under study of Hyderabad and Jamshoro site area. Sampling was done on monthly basis during the year 2015. Samples were analyzed for Physico-chemical parameters. The results were compared with National Environmental Quality Standard (NEQS) for municipal and liquid industrial effluent of Pakistan. The average ranging results of studied parameters were found as pH (4.64 – 7.74), E. C (1072 – 3021 µs/cm), salinity (0.6 – 1.5 ppt), TDS (684.1 – 2126.4 mg/L), Chlorides (86.83 – 1136.122 mg/L), Alkalinity (740.64 – 1491.2 mg/L), Hardness (125 – 346 mg/L), Sodium (30.08 – 69.18 mg/L), Potassium (47.49 – 66.96 mg/L), Calcium (140.06 – 185.4 mg/L), Magnesium (23.022 – 39.574 mg/L), Lead (0.0164 – 0.018 mg/L), Copper (2.328 – 2.984) and Zinc (0.0398 – 0.0448 mg/l). The concentration of pH, TDS, Zn and Pb, except Copper, of industrial effluents was found within permissible limits of NEQS for municipal and liquid industrial effluent of Pakistan.

Published in International Journal of Environmental Chemistry (Volume 1, Issue 2)
DOI 10.11648/j.ijec.20170102.12
Page(s) 28-31
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Pharmaceutical, Effluents, Hyderabad

References
[1] Garcia, A, Rivas, H. M, Figueroa, J. L. and Monroe, A. L. (1995). Case history: Pharmaceutical wastewater treatment plant upgrade, Smith Kline Beecham Pharmaceuticals company. Desalination. 102 (1-3): 255-263.
[2] Lateef, A. (2004). The microbiology of pharmaceutical effluent and its public health implications. World J. Microbiol Biotechnol. 20: 167-171.
[3] Ezenobi, N. O, & Okpokwasili, G. C. (2004). Bacterial flora and physico-chemical characteristics of Hospital sewage in Port Harcourt City. Nigerian Journal of Microbiology, 18 (1-2): 277-283.
[4] Ogunfowokan, O. A, & Fakankun, O. A. (2000). Physico-chemical characterization of effluents from beverage processing plants in Ibadan, Nigeria. International Journal for Environmental Studies. 54 (2): 145-152.
[5] Vanerkar, A. P, Satyanarayan, S. & Dharmadhikari, D. M. (2004). Toxicity of herbal pharmaceutical wastewater on fish Lebisterreticulatuus (Peters). J Environmental Science & Health 39 (1): 115–123.
[6] Adeyinka, J. S. (1996). Waste water treatment through reverse osmosis. Environment monitoring and assessment. 22 (3) 22-37.
[7] Gogate, P. R. & Pandit, A. B. (2004). A review of imperative technologies for waste water treatment. I. Oxidation technologies at ambient conditions. Advanced Environment Research 8: 501-506.
[8] Glassmeyer, S. T, Furlong E. T, Kolpin, D. W, Cahill, J. D, Zaugg S. D, Werner S. L. (2005). Transport of chemical and microbial contaminants from known wastewater discharge: potential for use as indicators of human fecal contamination. Environmental Science Technology, 36, 2005, 5157–69.
[9] Gadipelly, C. Pérez-González A, Yadav, G. D., Ortiz, I. Ibáñez, R, Rathod, V. K, and Kumudini V. Marathe, K. V. (2014), Pharmaceutical Industry Wastewater: Review of the Technologies for Water Treatment and Reuse, Indain Engineering Chemical Reearch 53 (29), 11571–11592.
[10] Debska J, Kot-Wasik A, Namiesnik J. (2004), Fate and analysis of pharmaceutical residues in the aquatic environment. Critcal Review Anal Chemistry 34 (1): 51–67.
Cite This Article
  • APA Style

    Muhammad Ali Bhatti, Khalida Faryal Almani, Ghulam Murtaza Mastoi, Muhammad Amin Qureshi, Muhammad Murtaza Qureshi. (2017). Physico-chemical Study of Effluents of Pharmaceutical Industries of Hyderabad Division Sindh Pakistan. International Journal of Environmental Chemistry, 1(2), 28-31. https://doi.org/10.11648/j.ijec.20170102.12

    Copy | Download

    ACS Style

    Muhammad Ali Bhatti; Khalida Faryal Almani; Ghulam Murtaza Mastoi; Muhammad Amin Qureshi; Muhammad Murtaza Qureshi. Physico-chemical Study of Effluents of Pharmaceutical Industries of Hyderabad Division Sindh Pakistan. Int. J. Environ. Chem. 2017, 1(2), 28-31. doi: 10.11648/j.ijec.20170102.12

    Copy | Download

    AMA Style

    Muhammad Ali Bhatti, Khalida Faryal Almani, Ghulam Murtaza Mastoi, Muhammad Amin Qureshi, Muhammad Murtaza Qureshi. Physico-chemical Study of Effluents of Pharmaceutical Industries of Hyderabad Division Sindh Pakistan. Int J Environ Chem. 2017;1(2):28-31. doi: 10.11648/j.ijec.20170102.12

    Copy | Download

  • @article{10.11648/j.ijec.20170102.12,
      author = {Muhammad Ali Bhatti and Khalida Faryal Almani and Ghulam Murtaza Mastoi and Muhammad Amin Qureshi and Muhammad Murtaza Qureshi},
      title = {Physico-chemical Study of Effluents of Pharmaceutical Industries of Hyderabad Division Sindh Pakistan},
      journal = {International Journal of Environmental Chemistry},
      volume = {1},
      number = {2},
      pages = {28-31},
      doi = {10.11648/j.ijec.20170102.12},
      url = {https://doi.org/10.11648/j.ijec.20170102.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijec.20170102.12},
      abstract = {The Pakistan Pharmaceutical Industry is one of indispensable industries of this country. This industry manufactures very important life saving as well as life-enhancing medicines. This industry produces a wide variety of chemical products which are consist of antibiotics, analgesics, disinfectants, anesthetics, muscle relaxants, water soluble salts,, anti-clotting agents, cardiovascular medicines and vitamin in different forms like tablets, capsules, ampoules, syrups. This industry plays the role of life saving institute. At the same time this huge industry has been witnessed a source of liquid pollution, if run without treatment plant or proper disposable measures. Present study of effluents of selected Pharmaceutical industries of Hyderabad Division was conducted. Total five industries were brought under study of Hyderabad and Jamshoro site area. Sampling was done on monthly basis during the year 2015. Samples were analyzed for Physico-chemical parameters. The results were compared with National Environmental Quality Standard (NEQS) for municipal and liquid industrial effluent of Pakistan. The average ranging results of studied parameters were found as pH (4.64 – 7.74), E. C (1072 – 3021 µs/cm), salinity (0.6 – 1.5 ppt), TDS (684.1 – 2126.4 mg/L), Chlorides (86.83 – 1136.122 mg/L), Alkalinity (740.64 – 1491.2 mg/L), Hardness (125 – 346 mg/L), Sodium (30.08 – 69.18 mg/L), Potassium (47.49 – 66.96 mg/L), Calcium (140.06 – 185.4 mg/L), Magnesium (23.022 – 39.574 mg/L), Lead (0.0164 – 0.018 mg/L), Copper (2.328 – 2.984) and Zinc (0.0398 – 0.0448 mg/l). The concentration of pH, TDS, Zn and Pb, except Copper, of industrial effluents was found within permissible limits of NEQS for municipal and liquid industrial effluent of Pakistan.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Physico-chemical Study of Effluents of Pharmaceutical Industries of Hyderabad Division Sindh Pakistan
    AU  - Muhammad Ali Bhatti
    AU  - Khalida Faryal Almani
    AU  - Ghulam Murtaza Mastoi
    AU  - Muhammad Amin Qureshi
    AU  - Muhammad Murtaza Qureshi
    Y1  - 2017/07/31
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ijec.20170102.12
    DO  - 10.11648/j.ijec.20170102.12
    T2  - International Journal of Environmental Chemistry
    JF  - International Journal of Environmental Chemistry
    JO  - International Journal of Environmental Chemistry
    SP  - 28
    EP  - 31
    PB  - Science Publishing Group
    SN  - 2640-1460
    UR  - https://doi.org/10.11648/j.ijec.20170102.12
    AB  - The Pakistan Pharmaceutical Industry is one of indispensable industries of this country. This industry manufactures very important life saving as well as life-enhancing medicines. This industry produces a wide variety of chemical products which are consist of antibiotics, analgesics, disinfectants, anesthetics, muscle relaxants, water soluble salts,, anti-clotting agents, cardiovascular medicines and vitamin in different forms like tablets, capsules, ampoules, syrups. This industry plays the role of life saving institute. At the same time this huge industry has been witnessed a source of liquid pollution, if run without treatment plant or proper disposable measures. Present study of effluents of selected Pharmaceutical industries of Hyderabad Division was conducted. Total five industries were brought under study of Hyderabad and Jamshoro site area. Sampling was done on monthly basis during the year 2015. Samples were analyzed for Physico-chemical parameters. The results were compared with National Environmental Quality Standard (NEQS) for municipal and liquid industrial effluent of Pakistan. The average ranging results of studied parameters were found as pH (4.64 – 7.74), E. C (1072 – 3021 µs/cm), salinity (0.6 – 1.5 ppt), TDS (684.1 – 2126.4 mg/L), Chlorides (86.83 – 1136.122 mg/L), Alkalinity (740.64 – 1491.2 mg/L), Hardness (125 – 346 mg/L), Sodium (30.08 – 69.18 mg/L), Potassium (47.49 – 66.96 mg/L), Calcium (140.06 – 185.4 mg/L), Magnesium (23.022 – 39.574 mg/L), Lead (0.0164 – 0.018 mg/L), Copper (2.328 – 2.984) and Zinc (0.0398 – 0.0448 mg/l). The concentration of pH, TDS, Zn and Pb, except Copper, of industrial effluents was found within permissible limits of NEQS for municipal and liquid industrial effluent of Pakistan.
    VL  - 1
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Centre of Environmental Sciences, University of Sindh Jamshoro, Jamshoro, Pakistan

  • Centre of Environmental Sciences, University of Sindh Jamshoro, Jamshoro, Pakistan

  • Institute of Advanced Research Studies in Chemical Sciences, University of Sindh Jamshoro, Jamshoro, Pakistan

  • Centre of Environmental Sciences, University of Sindh Jamshoro, Jamshoro, Pakistan

  • Institute of Advanced Research Studies in Chemical Sciences, University of Sindh Jamshoro, Jamshoro, Pakistan

  • Sections