Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts

Madugula Udaya Kumar; Mohmmad Yousuf Ali

doi:doi:10.11648/j.ijmea.20180605.11

| Peer-Reviewed

Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts

Madugula Udaya Kumar, Mohmmad Yousuf Ali

Published in International Journal of Mechanical Engineering and Applications (Volume 6, Issue 5)

Received: 14 October 2018 Accepted: 8 November 2018 Published: 24 December 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The present work experimental and numerical investigations have been carried out to study friction factor and heat transfer characteristics of twisted square ducts. Experiments were conducted for different velocities of air under constant heat flux condition, twist ratio is equal to 6.12 and also Reynolds number varied from 8000 to 30000. The experimental analysis has been carried out and the experimentation is completely based upon design of experiments to get the optimum heat transfer rate and minimize pressure drop. The results of friction factor, Nusselt number and thermal performance factor are presented. Twisted square duct shows relatively higher heat transfer and optimum pressure drop compared to plain square duct. The experimental results shows that Nusselt number for the twisted square duct is about 1.89 times above that for the plain square duct while friction factor is 2.29 times higher (f/fo= 2.29). Thermal performance (enhancement ratio) of the twisted square duct is 1.41. In this work Numeric simulations were calculated by using the CFD software package ANSYS 18.2 FLUENT has been used. Heat transfer and numerical flow behaviors such as temperature, friction factor contours of the are also reported. Hence it is concluded that square duct with twist ratio 6.12 gives highest heat transfer and thermal performance due to lowest friction loss indicating promising device of the twisted square duct.

Published in	International Journal of Mechanical Engineering and Applications (Volume 6, Issue 5)
DOI	10.11648/j.ijmea.20180605.11
Page(s)	134-141
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Heat Transfer, Twisted Square Duct, Reynolds Number, Friction Factor, Twist Ratio, Enhancement, CFD Analysis

References

[1]	Amar RajSingh Suri, Anilkumar , Rajesh Maithani “Heat transfer enhancement of heat exchanger tube with multiple square perforated twisted tape inserts” Experimental investigation and correlation development, Chemical Engineering processing process Intensification Volume 116 (2017)Pages 76-96.
[2]	Liang-Bi Wang1 Wen-Quan Tao Qiu-Wang Wang Ya-Ling He “Experimental and Numerical Study of Turbulent Heat Transfer in Twisted Square Ducts”ASMEVol 123, (2001) 868-877.
[3]	P. Samruaisin, W. Changcharoen, c. Thianpong, V. Chuwattanakul, M. Pimsarn, S. Eiamsa-ard “Influence of regularly spaced quadruple twisted tape elements on thermal enhancement characteristics” Chemical Engineering and Processing Intensification, Volume 128(2018) pp 114-123.
[4]	S. Eiamsa-ard , W. Changcharoen“ Flow structure and heat transfer in a square duct fitted with dual/quadruple twisted-tapes: Influence of tape configuration “Journal of Mechanical Science and Technology29(2015) 3501-3518.
[5]	M. Khoshvaght Aliabad S. F. Khaligh Z. Tavassoli,”An investigation of heat transfer in heat exchange devices with spirally-coiled twisted-ducts using nanofluid,” Applied Thermal Engineering, Volume 143(2018) pp, 358-375.
[6]	K. NananK. YongsiriK. Wongcharee, C. Thianpong, S. Eiamsa-ard, “Heat transfer enhancement by helically twisted tapes inducing co- and counter-swirl flows” 46(2013) 67-73.
[7]	A Saysroy , S. Eiamsa-ard “Enhancing convective heat transfer in laminar and turbulent flow regions using multi-channel twisted tape inserts” International Journal of Thermal sciences, volume 121, pp55-74.
[8]	Naveen Sharma, Andallib, TandallibTariq, Manish Mishra, “Experimental Investigation of Heat Transfer Enhancement in Rectangular Duct with truncated Pentagonal Ribs”, Journal Heat transfer Engineering, 2018, pp 383-396.
[9]	Natthaporn Kaewchoothong , Kittinan Maliwan , Kenichiro Takeishi , Chayut Nuntadusit “Effect of inclined ribs on heat transfer coefficient in stationary square Channel” Theoretical & Applied Mechanics Letters 7 (2017), pp 344–350.
[10]	Vinous M. Hameed, Maha A . Hussein “Effect of new type of enhancement on inside and outside surface of the tube side in single pass heat exchanger” Applied Thermal Engineering, Volume 122 (2017), pp484-491.
[11]	Pongjet Promvonge, Supattarachai Suwannapan, Monsak Pimsarn, Chinaruk Thianpong “Experimental study on heat transfer in square duct with combined twisted-tape and winglet vortex generators” (ICHMT 2015) 59( 2014) 158–165.
[12]	R Bhadouriya, A Agrawal, SV Prabhu “Experimental and numerical study of fluid flow and heat transfer in a twisted square duct” Journal of Heat and Mass Transfer, 82( 2015) 143-158.
[13]	Nihal UĞURLUBİLEK “Numerical investigation of heat transfer and flow in a twisted shaped square duct” Journal . of Thermal Science and Technology , 32(2012), 121-131.

Cite This Article

Plain Text BibTeX RIS

APA Style

Madugula Udaya Kumar, Mohmmad Yousuf Ali. (2018). Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts. International Journal of Mechanical Engineering and Applications, 6(5), 134-141. https://doi.org/10.11648/j.ijmea.20180605.11

Copy | Download

ACS Style

Madugula Udaya Kumar; Mohmmad Yousuf Ali. Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts. Int. J. Mech. Eng. Appl. 2018, 6(5), 134-141. doi: 10.11648/j.ijmea.20180605.11

Copy | Download

AMA Style

Madugula Udaya Kumar, Mohmmad Yousuf Ali. Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts. Int J Mech Eng Appl. 2018;6(5):134-141. doi: 10.11648/j.ijmea.20180605.11

Copy | Download

@article{10.11648/j.ijmea.20180605.11,
  author = {Madugula Udaya Kumar and Mohmmad Yousuf Ali},
  title = {Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {6},
  number = {5},
  pages = {134-141},
  doi = {10.11648/j.ijmea.20180605.11},
  url = {https://doi.org/10.11648/j.ijmea.20180605.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20180605.11},
  abstract = {The present work experimental and numerical investigations have been carried out to study friction factor and heat transfer characteristics of twisted square ducts. Experiments were conducted for different velocities of air under constant heat flux condition, twist ratio is equal to 6.12 and also Reynolds number varied from 8000 to 30000. The experimental analysis has been carried out and the experimentation is completely based upon design of experiments to get the optimum heat transfer rate and minimize pressure drop. The results of friction factor, Nusselt number and thermal performance factor are presented. Twisted square duct shows relatively higher heat transfer and optimum pressure drop compared to plain square duct. The experimental results shows that Nusselt number for the twisted square duct is about 1.89 times above that for the plain square duct while friction factor is 2.29 times higher (f/fo= 2.29). Thermal performance (enhancement ratio) of the twisted square duct is 1.41. In this work Numeric simulations were calculated by using the CFD software package ANSYS 18.2 FLUENT has been used. Heat transfer and numerical flow behaviors such as temperature, friction factor contours of the are also reported. Hence it is concluded that square duct with twist ratio 6.12 gives highest heat transfer and thermal performance due to lowest friction loss indicating promising device of the twisted square duct.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts
AU  - Madugula Udaya Kumar
AU  - Mohmmad Yousuf Ali
Y1  - 2018/12/24
PY  - 2018
N1  - https://doi.org/10.11648/j.ijmea.20180605.11
DO  - 10.11648/j.ijmea.20180605.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 134
EP  - 141
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20180605.11
AB  - The present work experimental and numerical investigations have been carried out to study friction factor and heat transfer characteristics of twisted square ducts. Experiments were conducted for different velocities of air under constant heat flux condition, twist ratio is equal to 6.12 and also Reynolds number varied from 8000 to 30000. The experimental analysis has been carried out and the experimentation is completely based upon design of experiments to get the optimum heat transfer rate and minimize pressure drop. The results of friction factor, Nusselt number and thermal performance factor are presented. Twisted square duct shows relatively higher heat transfer and optimum pressure drop compared to plain square duct. The experimental results shows that Nusselt number for the twisted square duct is about 1.89 times above that for the plain square duct while friction factor is 2.29 times higher (f/fo= 2.29). Thermal performance (enhancement ratio) of the twisted square duct is 1.41. In this work Numeric simulations were calculated by using the CFD software package ANSYS 18.2 FLUENT has been used. Heat transfer and numerical flow behaviors such as temperature, friction factor contours of the are also reported. Hence it is concluded that square duct with twist ratio 6.12 gives highest heat transfer and thermal performance due to lowest friction loss indicating promising device of the twisted square duct.
VL  - 6
IS  - 5
ER  -

Copy | Download

Author Information

Madugula Udaya Kumar

Department of Mechanical Engineering, Indur Institute of Engineering & Technology, Siddipet, India
Mohmmad Yousuf Ali

Department of Mechanical Engineering, Avanthi College of Engineering and Technology, Hyderabad, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Madugula Udaya Kumar, Mohmmad Yousuf Ali. (2018). Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts. International Journal of Mechanical Engineering and Applications, 6(5), 134-141. https://doi.org/10.11648/j.ijmea.20180605.11

Copy | Download

ACS Style

Madugula Udaya Kumar; Mohmmad Yousuf Ali. Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts. Int. J. Mech. Eng. Appl. 2018, 6(5), 134-141. doi: 10.11648/j.ijmea.20180605.11

Copy | Download

AMA Style

Madugula Udaya Kumar, Mohmmad Yousuf Ali. Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts. Int J Mech Eng Appl. 2018;6(5):134-141. doi: 10.11648/j.ijmea.20180605.11

Copy | Download

@article{10.11648/j.ijmea.20180605.11,
  author = {Madugula Udaya Kumar and Mohmmad Yousuf Ali},
  title = {Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {6},
  number = {5},
  pages = {134-141},
  doi = {10.11648/j.ijmea.20180605.11},
  url = {https://doi.org/10.11648/j.ijmea.20180605.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20180605.11},
  abstract = {The present work experimental and numerical investigations have been carried out to study friction factor and heat transfer characteristics of twisted square ducts. Experiments were conducted for different velocities of air under constant heat flux condition, twist ratio is equal to 6.12 and also Reynolds number varied from 8000 to 30000. The experimental analysis has been carried out and the experimentation is completely based upon design of experiments to get the optimum heat transfer rate and minimize pressure drop. The results of friction factor, Nusselt number and thermal performance factor are presented. Twisted square duct shows relatively higher heat transfer and optimum pressure drop compared to plain square duct. The experimental results shows that Nusselt number for the twisted square duct is about 1.89 times above that for the plain square duct while friction factor is 2.29 times higher (f/fo= 2.29). Thermal performance (enhancement ratio) of the twisted square duct is 1.41. In this work Numeric simulations were calculated by using the CFD software package ANSYS 18.2 FLUENT has been used. Heat transfer and numerical flow behaviors such as temperature, friction factor contours of the are also reported. Hence it is concluded that square duct with twist ratio 6.12 gives highest heat transfer and thermal performance due to lowest friction loss indicating promising device of the twisted square duct.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Heat Transfer and Friction Factor Characteristics in Twisted Square Ducts
AU  - Madugula Udaya Kumar
AU  - Mohmmad Yousuf Ali
Y1  - 2018/12/24
PY  - 2018
N1  - https://doi.org/10.11648/j.ijmea.20180605.11
DO  - 10.11648/j.ijmea.20180605.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 134
EP  - 141
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20180605.11
AB  - The present work experimental and numerical investigations have been carried out to study friction factor and heat transfer characteristics of twisted square ducts. Experiments were conducted for different velocities of air under constant heat flux condition, twist ratio is equal to 6.12 and also Reynolds number varied from 8000 to 30000. The experimental analysis has been carried out and the experimentation is completely based upon design of experiments to get the optimum heat transfer rate and minimize pressure drop. The results of friction factor, Nusselt number and thermal performance factor are presented. Twisted square duct shows relatively higher heat transfer and optimum pressure drop compared to plain square duct. The experimental results shows that Nusselt number for the twisted square duct is about 1.89 times above that for the plain square duct while friction factor is 2.29 times higher (f/fo= 2.29). Thermal performance (enhancement ratio) of the twisted square duct is 1.41. In this work Numeric simulations were calculated by using the CFD software package ANSYS 18.2 FLUENT has been used. Heat transfer and numerical flow behaviors such as temperature, friction factor contours of the are also reported. Hence it is concluded that square duct with twist ratio 6.12 gives highest heat transfer and thermal performance due to lowest friction loss indicating promising device of the twisted square duct.
VL  - 6
IS  - 5
ER  -

Copy | Download