| Peer-Reviewed

Low-Cost 3D Imaging and Measurement Techniques for Documentation of Meram Masonry Arch Bridge in Turkey

Received: 6 October 2017    Accepted: 3 November 2017    Published: 25 December 2017
Views:       Downloads:
Abstract

A lot of historical masonry arch bridges that have different architect and ages had been built in Turkey. Some of them have still been used, the others have been broken down due to natural or human effects. These bridges have complex shapes and difficult conditions to measuring. The close-range photogrammetry and photogrammetric dense point cloud methods enable to creating 3D model of a great number of historical bridges with fast, low-cost and high accuracy. The Meram Bridge is inside the Konya Metropolitan Municipality. It has still serve to public usage, today. It’s dimensions are 29.5m long and 4.5m width, and has five arches. It has been restored many times so far. Though it has not been known when it was built, but it is probably belong to period of Seljuk Empire and Karamannid state during 13-14 century (BC). In this study, historical Meram bridges have been measured and 3D model was created. After given some literature review about the masonry arch bridges in Turkey, the 3D model of Meram Bridge was created. Its dimensions were given on the orthophoto images.

Published in International Journal of Sensors and Sensor Networks (Volume 5, Issue 5)
DOI 10.11648/j.ijssn.20170505.11
Page(s) 63-69
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Close-Range Photogrammetry, Dense Point Cloud, Masonry Arch Bridges, 3D Modelling, Image Based Modelling

References
[1] A. Ural, Ş. Oruç, A. Doğangün and Ö. İ. Tuluk, 2008. Turkish Historicfal Arc Bridges and Their Deteriorations and Failures, Engineering Failure Analysis 15 (1-2): 43-53.
[2] Duran, R., 2008. Tarihi Konya köprüleri (Meram İlçesi), XII. Ortaçağ Türk Dönemi Kazıları ve Sanat Tarihi Sempozyumu. 15-17 Ekim, Çanakkale, Çanakkale Onsekiz Mart Üniversitesi Yayınları No: 98, 154-165.
[3] M. Scaioni, R. Perko and M. R. Veronez, 2014. Applications of Surveying in Land Management, Earth Science Informatics 7 (2): 69–70.
[4] R. Jiang, D. V. Jauregui and K. R. White, 2008. Close-Range Photogrammetry Applications in Bridge Measurement: Literature Review, Measurement 41 (8): 823-834.
[5] J., Albert, H. G. Maas, A. Schade and W. Schwarz, 2002. Pilot Studies on Photogrammetric Bridge Deformation Measurement, Proceedings of the Second IAG Commission IV Symposium on Geodesy for Geotechnical and Structural Engineering, Berlin Germany, May 21-24, 7 pages.
[6] J. Valenca, E. Julio and H. Araujo, 2008. Application of Photogrammetry to Bridge Measurement, 12th International Conference on Structural Faults and Repair, Edinburgh, GB, June 10-12, pp. 1-11.
[7] Altuntas, C., 2013. Keypoint based automatic image orientation and skew investigation on tie points, Kybernetes 42 (3): 506-520.
[8] Kraus, K. 2007. Photogrammetry: Geometry from Images and Laser Scans, Walter de Gruyter, Berlin.
[9] Remondino, F., Ressl, C. 2006. Overview and experiences in automated markerless image orientation, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (IAPRS), Vol. 36, Part 3.
[10] Hartley, R. I., Zisserman, A. 2004. Multiple View Geometry in Computer Vision, 2nd ed., Cambridge University Press, Cambridge.
[11] Brazetti, L., Scaioni, M., Remondino, F. 2010. Orientation and 3D modelling from markerless terrestrial images: combining accuracy with automated. The Photogrammetric Record 25 (132): 356-381.
[12] F. Remondino, M. G. Spera, E. Nocerino, F. Menna, F. Nex and S. G. Barsanti, 2013. Dense Image Matching: Comparisons and Analyses, Digital Heritage International Congress (Digital Heritage), IEEE, 1: pp. 47-54.
[13] Eos Systems Inc., 2016. Photomodeler, http://www.photomodeler.com/products/modeler/ default.html [Accessed on 03 Nov, 2016].
[14] Agisoft, 2017. Photoscan Professional (Version 1.3.2.4205).
Cite This Article
  • APA Style

    Cihan Altuntas, Mustafa Emirhan Pehlivanlı, Selman Kurban. (2017). Low-Cost 3D Imaging and Measurement Techniques for Documentation of Meram Masonry Arch Bridge in Turkey. International Journal of Sensors and Sensor Networks, 5(5), 63-69. https://doi.org/10.11648/j.ijssn.20170505.11

    Copy | Download

    ACS Style

    Cihan Altuntas; Mustafa Emirhan Pehlivanlı; Selman Kurban. Low-Cost 3D Imaging and Measurement Techniques for Documentation of Meram Masonry Arch Bridge in Turkey. Int. J. Sens. Sens. Netw. 2017, 5(5), 63-69. doi: 10.11648/j.ijssn.20170505.11

    Copy | Download

    AMA Style

    Cihan Altuntas, Mustafa Emirhan Pehlivanlı, Selman Kurban. Low-Cost 3D Imaging and Measurement Techniques for Documentation of Meram Masonry Arch Bridge in Turkey. Int J Sens Sens Netw. 2017;5(5):63-69. doi: 10.11648/j.ijssn.20170505.11

    Copy | Download

  • @article{10.11648/j.ijssn.20170505.11,
      author = {Cihan Altuntas and Mustafa Emirhan Pehlivanlı and Selman Kurban},
      title = {Low-Cost 3D Imaging and Measurement Techniques for Documentation of Meram Masonry Arch Bridge in Turkey},
      journal = {International Journal of Sensors and Sensor Networks},
      volume = {5},
      number = {5},
      pages = {63-69},
      doi = {10.11648/j.ijssn.20170505.11},
      url = {https://doi.org/10.11648/j.ijssn.20170505.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijssn.20170505.11},
      abstract = {A lot of historical masonry arch bridges that have different architect and ages had been built in Turkey. Some of them have still been used, the others have been broken down due to natural or human effects. These bridges have complex shapes and difficult conditions to measuring. The close-range photogrammetry and photogrammetric dense point cloud methods enable to creating 3D model of a great number of historical bridges with fast, low-cost and high accuracy. The Meram Bridge is inside the Konya Metropolitan Municipality. It has still serve to public usage, today. It’s dimensions are 29.5m long and 4.5m width, and has five arches. It has been restored many times so far. Though it has not been known when it was built, but it is probably belong to period of Seljuk Empire and Karamannid state during 13-14 century (BC). In this study, historical Meram bridges have been measured and 3D model was created. After given some literature review about the masonry arch bridges in Turkey, the 3D model of Meram Bridge was created. Its dimensions were given on the orthophoto images.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Low-Cost 3D Imaging and Measurement Techniques for Documentation of Meram Masonry Arch Bridge in Turkey
    AU  - Cihan Altuntas
    AU  - Mustafa Emirhan Pehlivanlı
    AU  - Selman Kurban
    Y1  - 2017/12/25
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ijssn.20170505.11
    DO  - 10.11648/j.ijssn.20170505.11
    T2  - International Journal of Sensors and Sensor Networks
    JF  - International Journal of Sensors and Sensor Networks
    JO  - International Journal of Sensors and Sensor Networks
    SP  - 63
    EP  - 69
    PB  - Science Publishing Group
    SN  - 2329-1788
    UR  - https://doi.org/10.11648/j.ijssn.20170505.11
    AB  - A lot of historical masonry arch bridges that have different architect and ages had been built in Turkey. Some of them have still been used, the others have been broken down due to natural or human effects. These bridges have complex shapes and difficult conditions to measuring. The close-range photogrammetry and photogrammetric dense point cloud methods enable to creating 3D model of a great number of historical bridges with fast, low-cost and high accuracy. The Meram Bridge is inside the Konya Metropolitan Municipality. It has still serve to public usage, today. It’s dimensions are 29.5m long and 4.5m width, and has five arches. It has been restored many times so far. Though it has not been known when it was built, but it is probably belong to period of Seljuk Empire and Karamannid state during 13-14 century (BC). In this study, historical Meram bridges have been measured and 3D model was created. After given some literature review about the masonry arch bridges in Turkey, the 3D model of Meram Bridge was created. Its dimensions were given on the orthophoto images.
    VL  - 5
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Department of Geomatics, Engineering Faculty, Selcuk University, Konya, Turkey

  • Department of Geomatics, Engineering Faculty, Selcuk University, Konya, Turkey

  • Sections