Advances in Materials

| Peer-Reviewed |

Recovery of Valuable Metals from Spent Lithium Ion Batteries (LIBs) Using Physical Pretreatment and a Hydrometallurgy Process

Received: Dec. 28, 2018    Accepted: Jan. 20, 2019    Published: Feb. 21, 2019
Views:       Downloads:

Share This Article

Abstract

Lithium ion batteries are the most commonly used batteries at present, and because of the large number of people using and manufacturing them, the serious environmental problems caused by the final disposal of waste lithium batteries are worth discussing. In this study, lithium ion batteries were crushed with a crusher, and the obtained powder was then sieved and collected. The valuable metals in the lithium ion batteries were recovered using a hydrometallurgy process. The research included the use of acid leaching and chemical precipitation. Acid leaching of the cathode electrode powder with three kinds of acids, including citric acid, sulfuric acid, and hydrochloric acid, resulted in a leaching solution rich in lithium, cobalt, nickel, and manganese. The leaching solution obtained from hydrochloric acid leaching was selected as the liquid to be used for the precipitation experiments. Precipitation was performed first using a selective chemical precipitation method, and manganese was first precipitated as a black powder. The color of the leaching solution after manganese precipitation changed to dark pink, and the liquid was full of cobalt and nickel. Then, the cobalt and nickel were co-precipitated with ammonium citric, and the obtained precipitates were either pale pink or grayish pink. After precipitation of cobalt and nickel, only lithium was left in the transparent, colorless leaching liquid. Finally, lithium was concentrated through reduced pressure evaporation, and a green lithium salt was obtained.

DOI 10.11648/j.am.20190801.12
Published in Advances in Materials ( Volume 8, Issue 1, March 2019 )
Page(s) 12-20
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Spent Lithium-ion Battery, Lithium, Cobalt, Nickel, Manganese, Hydrometallurgy

References
[1] X. Chen, Y. Chen, T. Zhou, D. Liu, H. Hu, and S. Fan, Hydrometallurgical recovery of metal values from sulfuric acid leaching liquor of spent lithium-ion batteries. Elsevier, 2015, pp. 349-356 .
[2] F. Pagnanelli, E. Moscardini, P. Altimari, T. A. Atia, and L. Toro, Leaching of electrodic powders from lithium ion batteries: Optimization of operating conditions and effect of physical pretreatment for waste fraction retrieval. Elsevier, 2017, pp. 706-715.
[3] Chiu, K. L.; Chen, W. S. Recovery and Separation of Valuable Metals from Cathode Materials of Spent Lithium-Ion Batteries (LIBs) by Ion Exchange. Sci. Adv. Mater. 2017, 9, 2155–2160.
[4] L. Chen, X. Tang, Y. Zhang, L. Li, Z. Zeng, and Y. Zhang, "Process for the recovery of cobalt oxalate from spent lithium-ion batteries," Hydrometallurgy, vol. 108, no. 1-2, pp. 80-86, 2011.
[5] J. - S. Sohn, D. - H. Yang, S. - M. Shin, and J.-G. Kang, "Recovery of Cobalt in Sulfuric Acid Leaching Solution Using Oxalic Acid," Geosystem Engineering, vol. 9, no. 3, pp. 81-86, 2006.
[6] S. - g. Zhu, W. - z. He, G. - m. Li, X. Zhou, X. -j. Zhang, and J. - w. Huang, "Recovery of Co and Li from spent lithium-ion batteries by combination method of acid leaching and chemical precipitation," Transactions of Nonferrous Metals Society of China, vol. 22, no. 9, pp. 2274-2281, 2012.
[7] T. Suzuki, T. Nakamura, Y. Inoue, M. Niinae, and J. Shibata, A hydrometallurgical process for the separation of aluminum, cobalt, copper and lithium in acidic sulfate media. Elsevier, 2012, pp. 396-401.
[8] L. Li, J. Ge, F. Wu, R. Chen, S. Chen, and B. Wu, Recovery of cobalt and lithium from spent lithium ion batteries using organic citric acid as leachant (no. 1-3). Elsevier, 2010, pp. 288-293.
[9] G. Granata, E. Moscardini, F. Pagnanelli, F. Trabucco, and L. Toro, "Product recovery from Li-ion battery wastes coming from an industrial pre-treatment plant: Lab scale tests and process simulations," Journal of Power Sources, vol. 206, pp. 393-401, 2012.
[10] J. -S. Sohn, S. -M. Shin, D.-H. Yang, J.-G. Kang, and K. Yoo, "Study of Physical Treatment of Spent Military Use Lithium Primary Batteries for Recycling," Geosystem Engineering, vol. 10, no. 2, pp. 27-30, 2007.
[11] L. Li, J. Ge, R. Chen, F. Wu, S. Chen, and X. Zhang, Environmental friendly leaching reagent for cobalt and lithium recovery from spent lithium-ion batteries (no. 12). Elsevier, 2010, pp. 2615-2621.
[12] L. Li, J. Ge, F. Wu, R. Chen, S. Chen, and B. Wu, Recovery of cobalt and lithium from spent lithium ion batteries using organic citric acid as leachant (no. 1-3). Elsevier, 2010, pp. 288-293.
[13] L. Li et al., Ascorbic-acid-assisted recovery of cobalt and lithium from spent Li-ion batteries. Elsevier, 2012, pp. 21-27.
[14] L. Li, R. Chen, F. Sun, F. Wu, and J. Liu, Preparation of LiCoO2 films from spent lithium-ion batteries by a combined recycling process (no. 3-4). Elsevier, 2011, pp. 220-225.
[15] B. Fan, X. Chen, T. Zhou, J. Zhang, and B. Xu, "A sustainable process for the recovery of valuable metals from spent lithium-ion batteries," Waste Manag Res, vol. 34, no. 5, pp. 474-81, May 2016.
[16] M. Contestabile, S. Panero, and B. Scrosati, A laboratory-scale lithium-ion battery recycling process (no. 1-2). Elsevier, 2001, pp. 65-69.
[17] J. Li, P. Shi, Z. Wang, Y. Chen, and C.-C. Chang, A combined recovery process of metals in spent lithium-ion batteries (no. 8). Elsevier, 2009, pp. 1132-1136.
[18] R.-C. Wang, Y.-C. Lin, and S.-H. Wu, A novel recovery process of metal values from the cathode active materials of the lithium-ion secondary batteries (no. 3-4). Elsevier, 2009, pp. 194-201 .
[19] J. Li et al., Study of extraction and purification of Ni, Co and Mn from spent battery material (no. 1-2). Elsevier, 2009, pp. 7-12.
[20] J.-H. Li et al., Study of spent battery material leaching process (no. 3). Elsevier, 2009, pp. 751-755 .
[21] J. Kang, G. Senanayake, J. Sohn, and S. M. Shin, Recovery of cobalt sulfate from spent lithium ion batteries by reductive leaching and solvent extraction with Cyanex 272 (no. 3-4). Elsevier, 2010, pp. 168-171.
[22] J. Nan, D. Han, and X. Zuo, Recovery of metal values from spent lithium-ion batteries with chemical deposition and solvent extraction. Elsevier, 2005, pp. 278-284.
[23] S. M. Shin, N. H. Kim, J. S. Sohn, D. H. Yang, and Y. H. Kim, Development of a metal recovery process from Li-ion battery wastes (no. 3-4). Elsevier, 2005, pp. 172-181.
[24] G. Dorella and M. B. Mansur, A study of the separation of cobalt from spent Li-ion battery residues (no. 1). Elsevier, 2007, pp. 210-215.
[25] D. A. Ferreira, L. M. Z. Prados, D. Majuste, and M. B. Mansur, Hydrometallurgical separation of aluminium, cobalt, copper and lithium from spent Li-ion batteries (no. 1). Elsevier, 2009, pp. 238-246.
[26] J. Nan, D. Han, M. Yang, M. Cui, and X. Hou, Recovery of metal values from a mixture of spent lithium-ion batteries and nickel-metal hydride batteries (no. 1-2). Elsevier, 2006, pp. 75-80.
[27] C. K. Lee and K.-I. Rhee, Preparation of LiCoO2 from spent lithium-ion batteries (no. 1). Elsevier, 2002, pp. 17-21.
[28] L. Sun and K. Qiu, Vacuum pyrolysis and hydrometallurgical process for the recovery of valuable metals from spent lithium-ion batteries. Elsevier, 2011, pp. 378-384.
[29] J. Li, G. Wang, and Z. Xu, Generation and detection of metal ions and volatile organic compounds (VOCs) emissions from the pretreatment processes for recycling spent lithium-ion batteries, Waste Manag, vol. 52, pp. 221-7, Jun 2016.
[30] D. L. Wood, J. D. Quass, J. Li, S. Ahmed, D. Ventola, and C. Daniel, Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP, Drying Technology, vol. 36, no. 2, pp. 234-244, 2017.
[31] He, L. P.; Sun, S. Y.; Song, X. F.; Yu, J. G. Leaching process for recovering valuable metals from the LiNi1/3Co1/3Mn1/3O2 cathode of lithium-ion batteries, Waste Manag. vol. 64, pp.171–181, 2017.
[32] Pant, D.; Dolker, T. Green and facile method for the recovery of spent Lithium Nickel Manganese Cobalt Oxide (NMC) based Lithium ion batteries, Waste Manag, vol. 60, pp.689–695, 2017.
[33] Takacova, Z.; Havlik, T.; Kukurugya, F.; Orac, D. Cobalt and lithium recovery from active mass of spent Li-ion batteries: Theoretical and experimental approach. Hydrometallurgy, vol.163, pp.9-17, 2016.
[34] Zhang, X.; Xue, Q.; Li, L.; Fan, E.;Wu, F.; Chen, R. Sustainable Recycling and Regeneration of Cathode Scraps from Industrial Production of Lithium-Ion Batteries. ACS Sustain. Chem. Eng. vol.4, pp. 7041–7049, 2016.
[35] Diekmanna, J.; Hanisch, C.; Froböse, L.; Schälicke, G.; Loellhoeffel, T.; Fölster, A.-S.; Kwade, A. Ecological Recycling of Lithium-Ion Batteries from Electric Vehicles with Focus on Mechanical Processes.J. Electrochem. Soc. 164, A6184–A6191, 2017.
[36] Barik, S. P.; Prabaharan, G.; Kumar, B. An innovative approach to recover the metal values from spent lithium-ion batteries. Waste Manag, vol. 51, pp. 222–226, 2016.
Cite This Article
  • APA Style

    Kai-Lun Chiu, Yun-Hwei Shen, Yi-Hsuan Chen, Kaun-Yu Shih. (2019). Recovery of Valuable Metals from Spent Lithium Ion Batteries (LIBs) Using Physical Pretreatment and a Hydrometallurgy Process. Advances in Materials, 8(1), 12-20. https://doi.org/10.11648/j.am.20190801.12

    Copy | Download

    ACS Style

    Kai-Lun Chiu; Yun-Hwei Shen; Yi-Hsuan Chen; Kaun-Yu Shih. Recovery of Valuable Metals from Spent Lithium Ion Batteries (LIBs) Using Physical Pretreatment and a Hydrometallurgy Process. Adv. Mater. 2019, 8(1), 12-20. doi: 10.11648/j.am.20190801.12

    Copy | Download

    AMA Style

    Kai-Lun Chiu, Yun-Hwei Shen, Yi-Hsuan Chen, Kaun-Yu Shih. Recovery of Valuable Metals from Spent Lithium Ion Batteries (LIBs) Using Physical Pretreatment and a Hydrometallurgy Process. Adv Mater. 2019;8(1):12-20. doi: 10.11648/j.am.20190801.12

    Copy | Download

  • @article{10.11648/j.am.20190801.12,
      author = {Kai-Lun Chiu and Yun-Hwei Shen and Yi-Hsuan Chen and Kaun-Yu Shih},
      title = {Recovery of Valuable Metals from Spent Lithium Ion Batteries (LIBs) Using Physical Pretreatment and a Hydrometallurgy Process},
      journal = {Advances in Materials},
      volume = {8},
      number = {1},
      pages = {12-20},
      doi = {10.11648/j.am.20190801.12},
      url = {https://doi.org/10.11648/j.am.20190801.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.am.20190801.12},
      abstract = {Lithium ion batteries are the most commonly used batteries at present, and because of the large number of people using and manufacturing them, the serious environmental problems caused by the final disposal of waste lithium batteries are worth discussing. In this study, lithium ion batteries were crushed with a crusher, and the obtained powder was then sieved and collected. The valuable metals in the lithium ion batteries were recovered using a hydrometallurgy process. The research included the use of acid leaching and chemical precipitation. Acid leaching of the cathode electrode powder with three kinds of acids, including citric acid, sulfuric acid, and hydrochloric acid, resulted in a leaching solution rich in lithium, cobalt, nickel, and manganese. The leaching solution obtained from hydrochloric acid leaching was selected as the liquid to be used for the precipitation experiments. Precipitation was performed first using a selective chemical precipitation method, and manganese was first precipitated as a black powder. The color of the leaching solution after manganese precipitation changed to dark pink, and the liquid was full of cobalt and nickel. Then, the cobalt and nickel were co-precipitated with ammonium citric, and the obtained precipitates were either pale pink or grayish pink. After precipitation of cobalt and nickel, only lithium was left in the transparent, colorless leaching liquid. Finally, lithium was concentrated through reduced pressure evaporation, and a green lithium salt was obtained.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Recovery of Valuable Metals from Spent Lithium Ion Batteries (LIBs) Using Physical Pretreatment and a Hydrometallurgy Process
    AU  - Kai-Lun Chiu
    AU  - Yun-Hwei Shen
    AU  - Yi-Hsuan Chen
    AU  - Kaun-Yu Shih
    Y1  - 2019/02/21
    PY  - 2019
    N1  - https://doi.org/10.11648/j.am.20190801.12
    DO  - 10.11648/j.am.20190801.12
    T2  - Advances in Materials
    JF  - Advances in Materials
    JO  - Advances in Materials
    SP  - 12
    EP  - 20
    PB  - Science Publishing Group
    SN  - 2327-252X
    UR  - https://doi.org/10.11648/j.am.20190801.12
    AB  - Lithium ion batteries are the most commonly used batteries at present, and because of the large number of people using and manufacturing them, the serious environmental problems caused by the final disposal of waste lithium batteries are worth discussing. In this study, lithium ion batteries were crushed with a crusher, and the obtained powder was then sieved and collected. The valuable metals in the lithium ion batteries were recovered using a hydrometallurgy process. The research included the use of acid leaching and chemical precipitation. Acid leaching of the cathode electrode powder with three kinds of acids, including citric acid, sulfuric acid, and hydrochloric acid, resulted in a leaching solution rich in lithium, cobalt, nickel, and manganese. The leaching solution obtained from hydrochloric acid leaching was selected as the liquid to be used for the precipitation experiments. Precipitation was performed first using a selective chemical precipitation method, and manganese was first precipitated as a black powder. The color of the leaching solution after manganese precipitation changed to dark pink, and the liquid was full of cobalt and nickel. Then, the cobalt and nickel were co-precipitated with ammonium citric, and the obtained precipitates were either pale pink or grayish pink. After precipitation of cobalt and nickel, only lithium was left in the transparent, colorless leaching liquid. Finally, lithium was concentrated through reduced pressure evaporation, and a green lithium salt was obtained.
    VL  - 8
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Resources Engineering, National Cheng Kung University, Tainan City, Taiwan

  • Department of Resources Engineering, National Cheng Kung University, Tainan City, Taiwan

  • Department of Resources Engineering, National Cheng Kung University, Tainan City, Taiwan

  • Department of Resources Engineering, National Cheng Kung University, Tainan City, Taiwan

  • Section