Journal of Electrical and Electronic Engineering

Submit a Manuscript

Publishing with us to make your research visible to the widest possible audience.

Propose a Special Issue

Building a community of authors and readers to discuss the latest research and develop new ideas.

Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission

In order to achieve the low carbon and efficient working effect of CNC machine tools, this paper takes the 2243 VMC machining centre as the research object to study the problem between carbon emission and time, cost and process parameters in the machining process of machining centre machine tools, and establish the optimization model of CNC milling process parameters based on carbon emission. Carbon emissions, machining cost and machining time are taken as the optimisation objectives, tool life, roughness and machine power are taken as constraints, and spindle speed, feed per tooth, cutting width and depth of cut are taken as optimisation variables. The model is solved using a particle swarm algorithm (PSO) to produce a Pareto solution set for multi-objective optimisation. Finally, the optimisation results were compared with the calculated results for the empirical parameters to verify the feasibility of the model. The results show that the calculated results for the optimised parameters provide a 19.53% reduction in carbon emissions, a 12.96% reduction in processing costs and a 13.72% reduction in processing time after optimisation by the algorithm compared to the calculated results for the empirical parameters, indicating that the algorithm provides a better optimisation than the empirical parameters.

Carbon Emissions, CNC Milling, Process Parameter, Adaptive Grid Particle Swarm Algorithm

APA Style

Juan Wei, Yaxin Wei, Mengdi Wei, Simin Ren. (2023). Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission. Journal of Electrical and Electronic Engineering, 11(3), 77-81. https://doi.org/10.11648/j.jeee.20231103.12

ACS Style

Juan Wei; Yaxin Wei; Mengdi Wei; Simin Ren. Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission. J. Electr. Electron. Eng. 2023, 11(3), 77-81. doi: 10.11648/j.jeee.20231103.12

AMA Style

Juan Wei, Yaxin Wei, Mengdi Wei, Simin Ren. Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission. J Electr Electron Eng. 2023;11(3):77-81. doi: 10.11648/j.jeee.20231103.12

Copyright © 2023 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

1. BP p.l.c. BP statistical review of world energy [R]. 2021.
2. Zhou Ji. Intelligent manufacturing: the main direction of "Made in China 2025" [J]. China Mechanical Engineering, 2015, 26 (17: 2273-2284).
3. He Zhengchu, Pan Hongyu. Germany's "Industry 4.0" and "Made in China 2025" [J]. Journal of Changsha University of Technology (Social Science Edition), 2015 (3): 103-110.
4. Guan Guiqi, Yang Songshan et al. Analysis and research on the development of CNC technology in China [J]. Machinery manufacturing, 2013, 51 (6): 88-91.
5. Jeswiet J., Kara S. Carbon emissions and CESTM in manufacturing [J]. CIRP Annals- Manufacturing Technology, 2017, 57 (1): 17-20.
6. Munoz A A, Sheng P. An analytical approach for determining the environmental impact of machining processes [J]. Journal of Materials Processing Technology, 1995, 53 (3-4): 736-758.
7. Chen Zhichu, Li Cong et al. Cutting parameter optimization based on imperialistic competitive algorithm [J]. Manufacturing Automation, 2012, 34 (12): 10-15.
8. Li XP, Zhang ChaoYong et al. CNC cutting parameter optimization based on metacellular particle swarm algorithm [J]. Computer Engineering and Applications, 2014, 50 (2): 252-257.
9. Liu Qiong, Tian Youquan, Zhou Yingdong. Carbon footprint accounting of product manufacturing process and its optimization [J]. China Mechanical Engineering, 2015, 26 (17): 2336-2343.
10. Mei Zhimin, Zhang Rong, Xiong Qing, et al. Analysis and research on the transformation of low carbon manufacturing process of mechanical products [J]. Machine Manufacturing and Automation, 2012, 02: 75-78.
11. Li Congbo, Xiao Qinqi et al. Energy-efficient optimization method of CNC milling process parameters based on Taguchi method and response surface method [J]. Computer Integrated Manufacturing Systems, 2015, 21 (12): 3182-3191.
12. Ni Hengxin, Yan Chunping et al. Multi-objective optimization and decision making method for high speed dry cutting hobbing process parameters [J]. China Mechanical Engineering, 2021, 32 (7): 832-838.
13. Chi YL, Jiang Huan, Wu Yaoyu, et al. A model and experimental study on carbon emission of centerless grinding ERWC based on grinding removal rate [J]. Computer Integrated Manufacturing Systems: 1-33 (2023-04-19).
14. Yi X, Liu Chun, Li Congbo, et al. A small-sample data-driven approach for low-carbon optimization of hobbing process parameters [J]. China Mechanical Engineering, 2022, 33 (13): 1604-1612.
15. Li Fuchun. Research on cutting path and parameter decarbonization method of CNC milling tools under cost constraint [D]. Guizhou: Guizhou University, 2021.
16. Liu F, Xu Dijian, Chen G R. Energy saving decision model and practical method for CNC machine tools during no-load operation [J]. China Mechanical Engineering, 2009, 20 (1): 1344-1346.