There are different latent fingerprint recovering techniques, physical and chemical techniques are available for the development of latent fingerprints. Fingerprints detection requires high sensitivity, which is provided by luminescence and appropriate physical and chemical treatments. Photoluminescence detection of latent fingerprints has over the last quarter-century brought about a new level of fingerprint detection sensitivity. Fingerprints have many uses, a chemical solution usually used to detect fingerprints but it takes time. In this paper, we were operating with low-power lasers, He-Ne laser with output power 1mmW and wavelength 632.8nm and diode laser with output power 5mmW and wavelength 532nm to detect fingerprints on an aluminium and glass surfaces. Fingerprints were exposed by the laser beam through a convex lens with focal length 5mm then a digital camera was used to record luminescence from fingerprint. The revealed results show clear images for the fingerprints using two types of lasers He-Ne and diode and appearing its characteristics on different surfaces obviously. Using laser sources to detect fingerprints is a simple method using low-level lasers without chemicals, in a short period of time, with low cost and gives good results.
Published in | Radiation Science and Technology (Volume 5, Issue 4) |
DOI | 10.11648/j.rst.20190504.11 |
Page(s) | 37-40 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2019. Published by Science Publishing Group |
Forensic Science, Laser-matter Interaction, Laser Luminescence, Latent Fingerprint Detection, Photoluminescence, Optical Sensor
[1] | Saitoh N, Akiba N. Ultraviolet fluorescence spectra of fingerprints. The Scientific World Journal. 2005; 5: 355-66. |
[2] | Dalrymple BE, Duff JM, Menzel ER. Inherent fingerprint luminescence—detection by laser. Journal of Forensic Science. 1977 Jan 1; 22 (1): 106-15. |
[3] | Menzel ER, Savoy SM, Ulvick SJ, Cheng KH, Murdock RH, Sudduth MR. Photoluminescent semiconductor nanocrystals for fingerprint detection. Journal of Forensic Science. 2000 May 1; 45 (3): 545-51. |
[4] | Gaensslen RE, Ramotowski R, Lee HC. Advances in fingerprint technology. CRC press; 2001 Jun 15. |
[5] | Menzel ER. Fingerprint Detection with Photoluminescent. Advances in Fingerprint Technology. 2001 Jun 15: 211. |
[6] | Rohatgi R, Kapoor AK. Development of latent fingerprints on wet non-porous surfaces with SPR based on basic fuchsin dye. Egyptian Journal of Forensic Sciences. 2016 Jun 1; 6 (2): 179-84. |
[7] | Dhall JK, Sodhi GS, Kapoor AK. A novel method for the development of latent fingerprints recovered from arson simulation. Egyptian Journal of Forensic Sciences. 2013 Dec 1; 3 (4): 99-103. |
[8] | Trapecar M. Fingermarks on glass and metal surfaces recovered from stagnant water. Egyptian Journal of Forensic Sciences. 2012 Jun 1; 2 (2): 48-53. |
[9] | Bumbrah GS. Small particle reagent (SPR) method for detection of latent fingermarks: A review. Egyptian Journal of Forensic Sciences. 2016 Dec 1; 6 (4): 328-32. |
[10] | Badiye A, Kapoor N. Efficacy of Robin® powder blue for latent fingerprint development on various surfaces. Egyptian Journal of Forensic Sciences. 2015 Dec 1; 5 (4): 166-73. |
[11] | Jasuja OP, Kumar P, Singh G. Development of latent fingermarks on surfaces submerged in water: Optimization studies for phase transfer catalyst (PTC) based reagents. Science & Justice. 2015 Sep 1; 55 (5): 335-42. |
[12] | Taschuk, M. T., Tsui, Y. Y., & Fedosejevs, R. (2006). Detection and mapping of latent fingerprints by laser-induced breakdown spectroscopy. Applied spectroscopy, 60 (11), 1322-1327. |
[13] | Alaoui, I. M. (2009). Applications of luminescence to fingerprints and trace explosives detection. In Unexploded Ordnance Detection and Mitigation (pp. 189-196). Springer, Dordrecht. |
APA Style
Ali Abdelrhman Saeed Marouf, Malka Aldar Daood Abdalrheim Daood. (2019). Detection of Fingerprint using He-Ne and Diode Lasers on Aluminium and Glass Surfaces. Radiation Science and Technology, 5(4), 37-40. https://doi.org/10.11648/j.rst.20190504.11
ACS Style
Ali Abdelrhman Saeed Marouf; Malka Aldar Daood Abdalrheim Daood. Detection of Fingerprint using He-Ne and Diode Lasers on Aluminium and Glass Surfaces. Radiat. Sci. Technol. 2019, 5(4), 37-40. doi: 10.11648/j.rst.20190504.11
AMA Style
Ali Abdelrhman Saeed Marouf, Malka Aldar Daood Abdalrheim Daood. Detection of Fingerprint using He-Ne and Diode Lasers on Aluminium and Glass Surfaces. Radiat Sci Technol. 2019;5(4):37-40. doi: 10.11648/j.rst.20190504.11
@article{10.11648/j.rst.20190504.11, author = {Ali Abdelrhman Saeed Marouf and Malka Aldar Daood Abdalrheim Daood}, title = {Detection of Fingerprint using He-Ne and Diode Lasers on Aluminium and Glass Surfaces}, journal = {Radiation Science and Technology}, volume = {5}, number = {4}, pages = {37-40}, doi = {10.11648/j.rst.20190504.11}, url = {https://doi.org/10.11648/j.rst.20190504.11}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.rst.20190504.11}, abstract = {There are different latent fingerprint recovering techniques, physical and chemical techniques are available for the development of latent fingerprints. Fingerprints detection requires high sensitivity, which is provided by luminescence and appropriate physical and chemical treatments. Photoluminescence detection of latent fingerprints has over the last quarter-century brought about a new level of fingerprint detection sensitivity. Fingerprints have many uses, a chemical solution usually used to detect fingerprints but it takes time. In this paper, we were operating with low-power lasers, He-Ne laser with output power 1mmW and wavelength 632.8nm and diode laser with output power 5mmW and wavelength 532nm to detect fingerprints on an aluminium and glass surfaces. Fingerprints were exposed by the laser beam through a convex lens with focal length 5mm then a digital camera was used to record luminescence from fingerprint. The revealed results show clear images for the fingerprints using two types of lasers He-Ne and diode and appearing its characteristics on different surfaces obviously. Using laser sources to detect fingerprints is a simple method using low-level lasers without chemicals, in a short period of time, with low cost and gives good results.}, year = {2019} }
TY - JOUR T1 - Detection of Fingerprint using He-Ne and Diode Lasers on Aluminium and Glass Surfaces AU - Ali Abdelrhman Saeed Marouf AU - Malka Aldar Daood Abdalrheim Daood Y1 - 2019/10/31 PY - 2019 N1 - https://doi.org/10.11648/j.rst.20190504.11 DO - 10.11648/j.rst.20190504.11 T2 - Radiation Science and Technology JF - Radiation Science and Technology JO - Radiation Science and Technology SP - 37 EP - 40 PB - Science Publishing Group SN - 2575-5943 UR - https://doi.org/10.11648/j.rst.20190504.11 AB - There are different latent fingerprint recovering techniques, physical and chemical techniques are available for the development of latent fingerprints. Fingerprints detection requires high sensitivity, which is provided by luminescence and appropriate physical and chemical treatments. Photoluminescence detection of latent fingerprints has over the last quarter-century brought about a new level of fingerprint detection sensitivity. Fingerprints have many uses, a chemical solution usually used to detect fingerprints but it takes time. In this paper, we were operating with low-power lasers, He-Ne laser with output power 1mmW and wavelength 632.8nm and diode laser with output power 5mmW and wavelength 532nm to detect fingerprints on an aluminium and glass surfaces. Fingerprints were exposed by the laser beam through a convex lens with focal length 5mm then a digital camera was used to record luminescence from fingerprint. The revealed results show clear images for the fingerprints using two types of lasers He-Ne and diode and appearing its characteristics on different surfaces obviously. Using laser sources to detect fingerprints is a simple method using low-level lasers without chemicals, in a short period of time, with low cost and gives good results. VL - 5 IS - 4 ER -