Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy

Shouhei Koyama; Yuki Miyauchi; Hiroaki Ishizawa

doi:doi:10.11648/j.optics.20130201.14

| Peer-Reviewed

Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy

Shouhei Koyama, Yuki Miyauchi, Hiroaki Ishizawa

Published in Optics (Volume 2, Issue 1)

Published: 20 February 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

We try to develop a new measurement method for cleanliness evaluation of inner surface of narrow tubule.In this measurement method, we use the infrared spectroscopy and the partial least squares regression (PLSR).The absorption spectrum is measured by using fiber probe and cone mirror.We measure the spectra of the known amount of dirt.We build a calibration curve using these spectra and the PLSR.Next, we measured spectrum of inner surface of narrow tubule, and calculates the amount of remaining this dirt by the calibration curve.This method can be measured in a non-contact and non-destructive.This method can identify the remaining position and the type and amount of dirt.In this paper, we propose this measurement method as new cleanliness evaluation method has overcome the problems that exist in the cleanliness evaluation.

Published in	Optics (Volume 2, Issue 1)
DOI	10.11648/j.optics.20130201.14
Page(s)	25-31
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Cleanness Evaluation, IR Spectroscopy, Optical Fiber Probe And Cone Mirror, Inner Surface Of Narrow Tubule, Remaining Dirt

References

[1]	Murdoch H., Taylor D., Dickinson J., Walker J. T., Perrett D., Raven N. D. and Sutton J.M., Surface decontamination of surgical instruments, an ongoing dilemma, J. Hosp. Infect, 63(4), 2006, pp.432-438.
[2]	R. Ulrika, E. Lars, H. Paul, L. Torbjörn, L. Lisa, L. A. Lisa, M. Eva and R. Klas, A test for cleaning and disinfection processes in a washer-disinfector, Apmis, vol.109, 4, 2001, pp. 299-304.
[3]	Jetté L. P., Lambert N.G., Evaluation of two hot water washer disinfectors for medical instruments, Infect Control HospE-pidemiol,9(5), 1988, pp.194-199.
[4]	Smith G.W., Goldie F., Long S., Lappin D.F., Ramage G. and Smith A.J.,Quantitative analysis of residual protein conta-mination of podiatry instruments reprocessed through local and central decontamination units, Journal of Foot and Ankle Research, 4(2), 2011.
[5]	B. M. Andersen, K.Hochlin and J. P.Daling, Cleaning and Decontamination of Reusable Medical Equipments,Including the use of Hydrogen peroxide Gas Decontamination, J Mi-crobial BiochemTechnol, vol. 4(2), 2012, pp. 057-062.
[6]	WHO Guidelineson Hand Hygiene in Health Care, WHO Library Cataloguing-in-Publication Data, World Health Or-ganization 2009.
[7]	M. J. Alfa, P. Degagne and N. Olson, Worst-case soiling levels for patient-used flexible endoscopes before and after cleaning, American Journal of Infection Control, vol.27, 5, 1999, pp.392–401.
[8]	Baxter R. L., Baxter H. C., Campbell G. A., Grant K., Jones A., Richardson P. and Whittaker G., Quantitative analysis of residual protein contamination on processed surgical in-struments, J Hosp Infect, vol.63, 2006, pp.439-444.
[9]	M. Shimizu, S. Nakata, R. Fushimi, A. Mizutani, S. Noguchi, M. Monden, Y. Isaka and S. Uraoka, Development of the High Sensitivity Measurement Method for Checking Cleanliness of Medical Instruments, Japanese society of Medical Instrumentation, vol.75, No.1, 2005, pp.28-33.
[10]	T. Oda, Y. Hirata and T. Furuta, Evaluation of Cleaning Efficacy and Examination of New Test Soil Model, Japanese society of Medical Instrumentation, vol.76, No.11, 2006, pp.793-797.
[11]	D.R. Vij, Handbook of Applied Solid State Spectroscopy, Springer, 2006, pp. 411-450.
[12]	S. Koyama, H. Ishizawa, Y. Sakata, T. Gotoh, K. Nakamura, H. Kanai, T. Nishimatsu and E. Toba, Measurement of Re-maining Dirt in Medical Instrument Based on IR Spectros-copy and Cone-Shaped Mirror Reflectance, IEEE IMTC, 2005, pp.921-924.
[13]	D. M. Haaland and E. V. Thomas, Partial LeastSquares Me-thods for Spectral Analyses. 1, Relation to Other Quantitative Calibration Methods and the Extraction of Qualitative Information, Analytical Chemistry, vol. 60, No. 11, 1988.
[14]	S. Wold, A. Ruhe, H. Wold, and W. J. Dunn, The Collinearity Problem in Linear Regression, The Partial Least Squares (PLS) Approach to Generalized Inverses, SIAM J Sci Stat Comput, 5, 1984, pp. 735–743.
[15]	S. Wold, M. Sjostrom and L. Ericksson, PLS-regression, a basic tool of chemometrics, ChemomIntell Lab Syst, 58, 2001, pp. 109–130.
[16]	A. Lorber, L. E. Wangen and B. R. Kowalski, A theoretical foundation for the PLS algorithm, Journal of Chemometrics, vol.1(1), 1987, pp. 19–31.
[17]	S. Koyama, Y. Miyauchi and H. Ishizawa, Measurement system of remaining dirt on inner surface of a narrow tubule based on infrared spectroscopy, SICE Annual Conference, 2011, pp.82-86.
[18]	Rohman A., Kuwat T., Retno S., Sismindari, Yuny E. and Tridjoko W., Fourier Transform Infrared Spectroscopy ap-plied for rapid analysis of lard in palm oil, International Food Research Journal,vol.19 (3), 2012, pp.1161-1165.
[19]	R. Kramer, Chemometric Techniques for Quantitative Analysis, Marcel Dekker INC, 1998, pp. 131-142.

Cite This Article

Plain Text BibTeX RIS

APA Style

Shouhei Koyama, Yuki Miyauchi, Hiroaki Ishizawa. (2013). Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy. Optics, 2(1), 25-31. https://doi.org/10.11648/j.optics.20130201.14

Copy | Download

ACS Style

Shouhei Koyama; Yuki Miyauchi; Hiroaki Ishizawa. Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy. Optics. 2013, 2(1), 25-31. doi: 10.11648/j.optics.20130201.14

Copy | Download

AMA Style

Shouhei Koyama, Yuki Miyauchi, Hiroaki Ishizawa. Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy. Optics. 2013;2(1):25-31. doi: 10.11648/j.optics.20130201.14

Copy | Download

@article{10.11648/j.optics.20130201.14,
  author = {Shouhei Koyama and Yuki Miyauchi and Hiroaki Ishizawa},
  title = {Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy},
  journal = {Optics},
  volume = {2},
  number = {1},
  pages = {25-31},
  doi = {10.11648/j.optics.20130201.14},
  url = {https://doi.org/10.11648/j.optics.20130201.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.optics.20130201.14},
  abstract = {We try to develop a new measurement method for cleanliness evaluation of inner surface of narrow tubule.In this measurement method, we use the infrared spectroscopy and the partial least squares regression (PLSR).The absorption spectrum is measured by using fiber probe and cone mirror.We measure the spectra of the known amount of dirt.We build a calibration curve using these spectra and the PLSR.Next, we measured spectrum of inner surface of narrow tubule, and calculates the amount of remaining this dirt by the calibration curve.This method can be measured in a non-contact and non-destructive.This method can identify the remaining position and the type and amount of dirt.In this paper, we propose this measurement method as new cleanliness evaluation method has overcome the problems that exist in the cleanliness evaluation.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy
AU  - Shouhei Koyama
AU  - Yuki Miyauchi
AU  - Hiroaki Ishizawa
Y1  - 2013/02/20
PY  - 2013
N1  - https://doi.org/10.11648/j.optics.20130201.14
DO  - 10.11648/j.optics.20130201.14
T2  - Optics
JF  - Optics
JO  - Optics
SP  - 25
EP  - 31
PB  - Science Publishing Group
SN  - 2328-7810
UR  - https://doi.org/10.11648/j.optics.20130201.14
AB  - We try to develop a new measurement method for cleanliness evaluation of inner surface of narrow tubule.In this measurement method, we use the infrared spectroscopy and the partial least squares regression (PLSR).The absorption spectrum is measured by using fiber probe and cone mirror.We measure the spectra of the known amount of dirt.We build a calibration curve using these spectra and the PLSR.Next, we measured spectrum of inner surface of narrow tubule, and calculates the amount of remaining this dirt by the calibration curve.This method can be measured in a non-contact and non-destructive.This method can identify the remaining position and the type and amount of dirt.In this paper, we propose this measurement method as new cleanliness evaluation method has overcome the problems that exist in the cleanliness evaluation.
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Shouhei Koyama

Dept. of Faculty of Textile Science and Technology, Shinshu University, Nagano, Japan
Yuki Miyauchi

Dept. of Faculty of Textile Science and Technology, Shinshu University, Nagano, Japan
Hiroaki Ishizawa

Dept. of Faculty of Textile Science and Technology, Shinshu University, Nagano, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Shouhei Koyama, Yuki Miyauchi, Hiroaki Ishizawa. (2013). Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy. Optics, 2(1), 25-31. https://doi.org/10.11648/j.optics.20130201.14

Copy | Download

ACS Style

Shouhei Koyama; Yuki Miyauchi; Hiroaki Ishizawa. Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy. Optics. 2013, 2(1), 25-31. doi: 10.11648/j.optics.20130201.14

Copy | Download

AMA Style

Shouhei Koyama, Yuki Miyauchi, Hiroaki Ishizawa. Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy. Optics. 2013;2(1):25-31. doi: 10.11648/j.optics.20130201.14

Copy | Download

@article{10.11648/j.optics.20130201.14,
  author = {Shouhei Koyama and Yuki Miyauchi and Hiroaki Ishizawa},
  title = {Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy},
  journal = {Optics},
  volume = {2},
  number = {1},
  pages = {25-31},
  doi = {10.11648/j.optics.20130201.14},
  url = {https://doi.org/10.11648/j.optics.20130201.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.optics.20130201.14},
  abstract = {We try to develop a new measurement method for cleanliness evaluation of inner surface of narrow tubule.In this measurement method, we use the infrared spectroscopy and the partial least squares regression (PLSR).The absorption spectrum is measured by using fiber probe and cone mirror.We measure the spectra of the known amount of dirt.We build a calibration curve using these spectra and the PLSR.Next, we measured spectrum of inner surface of narrow tubule, and calculates the amount of remaining this dirt by the calibration curve.This method can be measured in a non-contact and non-destructive.This method can identify the remaining position and the type and amount of dirt.In this paper, we propose this measurement method as new cleanliness evaluation method has overcome the problems that exist in the cleanliness evaluation.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Cleanness Evaluation Method of Remaining Dirt on Inner Surface of Narrow Tubule by IR Spectroscopy
AU  - Shouhei Koyama
AU  - Yuki Miyauchi
AU  - Hiroaki Ishizawa
Y1  - 2013/02/20
PY  - 2013
N1  - https://doi.org/10.11648/j.optics.20130201.14
DO  - 10.11648/j.optics.20130201.14
T2  - Optics
JF  - Optics
JO  - Optics
SP  - 25
EP  - 31
PB  - Science Publishing Group
SN  - 2328-7810
UR  - https://doi.org/10.11648/j.optics.20130201.14
AB  - We try to develop a new measurement method for cleanliness evaluation of inner surface of narrow tubule.In this measurement method, we use the infrared spectroscopy and the partial least squares regression (PLSR).The absorption spectrum is measured by using fiber probe and cone mirror.We measure the spectra of the known amount of dirt.We build a calibration curve using these spectra and the PLSR.Next, we measured spectrum of inner surface of narrow tubule, and calculates the amount of remaining this dirt by the calibration curve.This method can be measured in a non-contact and non-destructive.This method can identify the remaining position and the type and amount of dirt.In this paper, we propose this measurement method as new cleanliness evaluation method has overcome the problems that exist in the cleanliness evaluation.
VL  - 2
IS  - 1
ER  -

Copy | Download