Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect

Wu Caibin; Li Bensheng; Yuan Chenfang; Zhao Jieming; Ye Jingsheng; Ni Shuainan

doi:doi:10.11648/j.ijmsa.20180704.16

| Peer-Reviewed

Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect

Wu Caibin, Li Bensheng, Yuan Chenfang, Zhao Jieming, Ye Jingsheng, Ni Shuainan

Published in International Journal of Materials Science and Applications (Volume 7, Issue 4)

Received: 10 July 2018 Accepted: 21 August 2018 Published: 11 September 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The spent lead-acid battery contains a large amount of lead metal and waste acid. If not treated or simply treated, it will cause serious environmental pollution and even endanger human health. The paper focuses on the recovery of valuable resources such as lead paste and plastic by replacing chemical methods with physical ones, which the bending performance was tested with electronic universal testing machine and the impact performance measured with plastic pendulum impact testing machine. At the same time, a self-designed crusher is also used for impact crushing. The test results showed that the plastic shell is hard and brittle and has strong resistance to bending, but its impact resistance is weak. The spent lead-acid batteries were crushed by self-designed impact crusher. In the broken products, the grids and fiber separators were distributed between 2.2-0.5 mm in diameter, while plastics mainly over 10 mm and lead paste mainly below 0.1 mm. The XRD results show that the lead in each particle size has different forms and contents of lead. Different comminution experiments show that the appropriate process parameters can achieve the existence of valuable resources such as plastics, grids, and lead pastes in spent lead-acid batteries according to their shape and size, which helps the subsequent sorting and recovery of valuable materials.

Published in	International Journal of Materials Science and Applications (Volume 7, Issue 4)
DOI	10.11648/j.ijmsa.20180704.16
Page(s)	153-160
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Spent Lead-Acid Batteries, Mechanical Properties, Impact Crushing, Granular Distribution, Resource Recovery

References

[1]	Chang Y, Mao X, Zhao Y, et al. Lead-acid battery use in the development of renewable energy systems in China [J]. Journal of Power Sources, 2009, 191 (1):176-183.
[2]	Treptow R S. The Lead-Acid Battery: Its Voltage in Theory and in Practice [J]. Journal of Chemical Education, 2002, 79 (3):334-338.
[3]	Ambrose H, Gershenson D, Gershenson A, et al. Driving rural energy access: a second-life application for electric-vehicle batteries [J]. Environmental Research Letters, 2014, 9 (9):094004.
[4]	Zhao, J., Cao, G. Extended Producer Responsibilities in the Lead-Acid Battery Industry. China Battery Industry Association, Beijing, 2015, pp. 1–50.
[5]	Tian X, Wu Y, Gong Y, et al. The lead-acid battery industry in China: outlook for production and recycling [J]. Waste Manage. Res.2015, 33 (11):986-994.
[6]	Li Xinzhan. Policy boosting the recovery of waste lead-acid batteries for a new era [J]. China Nonferrous Metals, 2018 (08):46-47.
[7]	Zhu X, Li L, Sun X, et al. Preparation of basic lead oxide from spent lead acid battery paste via chemical conversion [J]. Hydrometallurgy, 2012, 117-118:24-31.
[8]	Kuijp, T., Huang, L., Cherry et al. Health hazards of China's lead-acid battery industry: a review of its market drivers, production processes, and health impacts [J]. Environmental Health, 2013, 12 (1):61.
[9]	Chen L, Xu Z, Liu M, et al. Lead exposure assessment from study near a lead-acid battery factory in China [J]. Science of the Total Environment, 2012, 429 (429):191-198.
[10]	Zhu X, He X, Yang J, et al. Leaching of spent lead acid battery paste components by sodium citrate and acetic acid [J]. Journal of Hazardous Materials, 2013, 250-251 (8):387-396.
[11]	Cheng Ma, Yuehong Shu, Hongyu Chen. Recycling lead from spent lead pastes using oxalate and sodium oxalate and preparation of novel lead oxide for lead-acid batteries [J]. RSC Advances, 2015, 5 (115):94895-94902.
[12]	Gomes G M F, Mendes T F, Wada K. Reduction in toxicity and generation of slag in secondary lead process [J]. Journal of Cleaner Production, 2011, 19 (9):1096-1103.
[13]	Sun Z, Cao H, Zhang X, et al. Spent lead-acid battery recycling in China – A review and sustainable analyses on mass flow of lead [J]. Waste Management, 2017, 64:190.
[14]	Hu Hongyun, Zhu Xinfeng, Yang Jiakuan. Research progress in wet recycling of spent lead-acid batteries [J]. Chemical Progress, 2009, 28 (9):1662-1667.
[15]	RAMUS K, HAWKINS P．Lead/acid battery recycling and the new Isamelt process [J]. Journal of Power Sources1993 (42):299-313．
[16]	Gao Qian, Zhu Longguan, Shu Yuehong, et al. Research and discussion on crushing and sorting of spent lead-acid batteries [J]. Battery, 2013, 50 (1): 3-7.
[17]	Chen Wenjian. Spent batteries Pollution Status and Prevention Suggestions [J]. Environmental Science, 2014 (9):31-33.

Cite This Article

Plain Text BibTeX RIS

APA Style

Wu Caibin, Li Bensheng, Yuan Chenfang, Zhao Jieming, Ye Jingsheng, et al. (2018). Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect. International Journal of Materials Science and Applications, 7(4), 153-160. https://doi.org/10.11648/j.ijmsa.20180704.16

Copy | Download

ACS Style

Wu Caibin; Li Bensheng; Yuan Chenfang; Zhao Jieming; Ye Jingsheng, et al. Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect. Int. J. Mater. Sci. Appl. 2018, 7(4), 153-160. doi: 10.11648/j.ijmsa.20180704.16

Copy | Download

AMA Style

Wu Caibin, Li Bensheng, Yuan Chenfang, Zhao Jieming, Ye Jingsheng, et al. Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect. Int J Mater Sci Appl. 2018;7(4):153-160. doi: 10.11648/j.ijmsa.20180704.16

Copy | Download

@article{10.11648/j.ijmsa.20180704.16,
  author = {Wu Caibin and Li Bensheng and Yuan Chenfang and Zhao Jieming and Ye Jingsheng and Ni Shuainan},
  title = {Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect},
  journal = {International Journal of Materials Science and Applications},
  volume = {7},
  number = {4},
  pages = {153-160},
  doi = {10.11648/j.ijmsa.20180704.16},
  url = {https://doi.org/10.11648/j.ijmsa.20180704.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20180704.16},
  abstract = {The spent lead-acid battery contains a large amount of lead metal and waste acid. If not treated or simply treated, it will cause serious environmental pollution and even endanger human health. The paper focuses on the recovery of valuable resources such as lead paste and plastic by replacing chemical methods with physical ones, which the bending performance was tested with electronic universal testing machine and the impact performance measured with plastic pendulum impact testing machine. At the same time, a self-designed crusher is also used for impact crushing. The test results showed that the plastic shell is hard and brittle and has strong resistance to bending, but its impact resistance is weak. The spent lead-acid batteries were crushed by self-designed impact crusher. In the broken products, the grids and fiber separators were distributed between 2.2-0.5 mm in diameter, while plastics mainly over 10 mm and lead paste mainly below 0.1 mm. The XRD results show that the lead in each particle size has different forms and contents of lead. Different comminution experiments show that the appropriate process parameters can achieve the existence of valuable resources such as plastics, grids, and lead pastes in spent lead-acid batteries according to their shape and size, which helps the subsequent sorting and recovery of valuable materials.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect
AU  - Wu Caibin
AU  - Li Bensheng
AU  - Yuan Chenfang
AU  - Zhao Jieming
AU  - Ye Jingsheng
AU  - Ni Shuainan
Y1  - 2018/09/11
PY  - 2018
N1  - https://doi.org/10.11648/j.ijmsa.20180704.16
DO  - 10.11648/j.ijmsa.20180704.16
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 153
EP  - 160
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20180704.16
AB  - The spent lead-acid battery contains a large amount of lead metal and waste acid. If not treated or simply treated, it will cause serious environmental pollution and even endanger human health. The paper focuses on the recovery of valuable resources such as lead paste and plastic by replacing chemical methods with physical ones, which the bending performance was tested with electronic universal testing machine and the impact performance measured with plastic pendulum impact testing machine. At the same time, a self-designed crusher is also used for impact crushing. The test results showed that the plastic shell is hard and brittle and has strong resistance to bending, but its impact resistance is weak. The spent lead-acid batteries were crushed by self-designed impact crusher. In the broken products, the grids and fiber separators were distributed between 2.2-0.5 mm in diameter, while plastics mainly over 10 mm and lead paste mainly below 0.1 mm. The XRD results show that the lead in each particle size has different forms and contents of lead. Different comminution experiments show that the appropriate process parameters can achieve the existence of valuable resources such as plastics, grids, and lead pastes in spent lead-acid batteries according to their shape and size, which helps the subsequent sorting and recovery of valuable materials.
VL  - 7
IS  - 4
ER  -

Copy | Download

Author Information

Wu Caibin

School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou, China
Li Bensheng

School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou, China
Yuan Chenfang

School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou, China
Zhao Jieming

School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou, China
Ye Jingsheng

School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou, China
Ni Shuainan

School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Wu Caibin, Li Bensheng, Yuan Chenfang, Zhao Jieming, Ye Jingsheng, et al. (2018). Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect. International Journal of Materials Science and Applications, 7(4), 153-160. https://doi.org/10.11648/j.ijmsa.20180704.16

Copy | Download

ACS Style

Wu Caibin; Li Bensheng; Yuan Chenfang; Zhao Jieming; Ye Jingsheng, et al. Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect. Int. J. Mater. Sci. Appl. 2018, 7(4), 153-160. doi: 10.11648/j.ijmsa.20180704.16

Copy | Download

AMA Style

Wu Caibin, Li Bensheng, Yuan Chenfang, Zhao Jieming, Ye Jingsheng, et al. Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect. Int J Mater Sci Appl. 2018;7(4):153-160. doi: 10.11648/j.ijmsa.20180704.16

Copy | Download

@article{10.11648/j.ijmsa.20180704.16,
  author = {Wu Caibin and Li Bensheng and Yuan Chenfang and Zhao Jieming and Ye Jingsheng and Ni Shuainan},
  title = {Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect},
  journal = {International Journal of Materials Science and Applications},
  volume = {7},
  number = {4},
  pages = {153-160},
  doi = {10.11648/j.ijmsa.20180704.16},
  url = {https://doi.org/10.11648/j.ijmsa.20180704.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20180704.16},
  abstract = {The spent lead-acid battery contains a large amount of lead metal and waste acid. If not treated or simply treated, it will cause serious environmental pollution and even endanger human health. The paper focuses on the recovery of valuable resources such as lead paste and plastic by replacing chemical methods with physical ones, which the bending performance was tested with electronic universal testing machine and the impact performance measured with plastic pendulum impact testing machine. At the same time, a self-designed crusher is also used for impact crushing. The test results showed that the plastic shell is hard and brittle and has strong resistance to bending, but its impact resistance is weak. The spent lead-acid batteries were crushed by self-designed impact crusher. In the broken products, the grids and fiber separators were distributed between 2.2-0.5 mm in diameter, while plastics mainly over 10 mm and lead paste mainly below 0.1 mm. The XRD results show that the lead in each particle size has different forms and contents of lead. Different comminution experiments show that the appropriate process parameters can achieve the existence of valuable resources such as plastics, grids, and lead pastes in spent lead-acid batteries according to their shape and size, which helps the subsequent sorting and recovery of valuable materials.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Spent Lead-Acid Batteries Crushing Mechanical Properties and Impact Crushing Effect
AU  - Wu Caibin
AU  - Li Bensheng
AU  - Yuan Chenfang
AU  - Zhao Jieming
AU  - Ye Jingsheng
AU  - Ni Shuainan
Y1  - 2018/09/11
PY  - 2018
N1  - https://doi.org/10.11648/j.ijmsa.20180704.16
DO  - 10.11648/j.ijmsa.20180704.16
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 153
EP  - 160
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20180704.16
AB  - The spent lead-acid battery contains a large amount of lead metal and waste acid. If not treated or simply treated, it will cause serious environmental pollution and even endanger human health. The paper focuses on the recovery of valuable resources such as lead paste and plastic by replacing chemical methods with physical ones, which the bending performance was tested with electronic universal testing machine and the impact performance measured with plastic pendulum impact testing machine. At the same time, a self-designed crusher is also used for impact crushing. The test results showed that the plastic shell is hard and brittle and has strong resistance to bending, but its impact resistance is weak. The spent lead-acid batteries were crushed by self-designed impact crusher. In the broken products, the grids and fiber separators were distributed between 2.2-0.5 mm in diameter, while plastics mainly over 10 mm and lead paste mainly below 0.1 mm. The XRD results show that the lead in each particle size has different forms and contents of lead. Different comminution experiments show that the appropriate process parameters can achieve the existence of valuable resources such as plastics, grids, and lead pastes in spent lead-acid batteries according to their shape and size, which helps the subsequent sorting and recovery of valuable materials.
VL  - 7
IS  - 4
ER  -

Copy | Download