Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites

Tetsuro Yanaseko; Hiroshi Asanuma; Hiroshi Sato

doi:doi:10.11648/j.ijmsa.20150404.15

| Peer-Reviewed

Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites

Tetsuro Yanaseko, Hiroshi Asanuma, Hiroshi Sato

Published in International Journal of Materials Science and Applications (Volume 4, Issue 4)

Received: 10 June 2015 Accepted: 19 June 2015 Published: 4 July 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper describes the detection of an impact location by using anisotropy of the output voltage of a metal-core piezoelectric ceramic fiber/aluminum composite. Metal-core piezoelectric ceramic fibers are very fragile. The mechanical properties of metal-core piezoelectric ceramic fibers can be improved by embedding the fibers into the metals that have excellent reliability and strength. Therefore, metal-core piezoelectric ceramic fiber/aluminum composites were developed by using the Interphase Forming/Bonding method. Furthermore, the output voltage characteristics of fabricated a composite were evaluated, and the anisotropy of the output voltage was observed. In this study, the impact location detection system was developed by using the anisotropy of the output voltage of the composite. It is expected to reduce the number of sensors compared with conventional systems while maintaining the accuracy. As a result, the impact location detection was successfully developed by using the model of the output voltage of the composites that were disposed in two different positions to obtain the signals.

Published in	International Journal of Materials Science and Applications (Volume 4, Issue 4)
DOI	10.11648/j.ijmsa.20150404.15
Page(s)	256-260
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Structural Health Monitoring, Smart Material, Piezoelectric Material, Sensor, Aluminum, Metal Matrix Composite

References

[1]	J. M. W. Brownjohn, “Structural health monitoring of civil infrastructure,” Philosophical Transactions of the Royal Society A, 365 (2007), pp 589–622.
[2]	E. Aktan, A. J. Helmicki, V. J. Hunt, “Issues in health monitoring for intelligent infrastructure,” Smart Materials and Structures, 7 (1998), pp. 674–692.
[3]	E. Aktan, F. N. Catbas, K. A. Grimmelsman, C. J. Tsikos, “Issues in infrastructure health monitoring for management,” Journal of Engineering Mechanics, ASCE, 126 (2000), pp. 711–724.
[4]	H. Fukunaga, N. Hu, F-K. Chang, “Structural damage identification using piezoelectric sensors,” International Journal of Solids and Structures, 39 (2002), pp. 393-418.
[5]	W. H. Duan, Q. Wang, S. T. Quek, Applications of Piezoelectric Materials in Structural Health Monitoring and Repair: Selected Research Examples, Materials, 3 (2010), pp. 5169-5194.
[6]	S. S. Kessler, S. M. Spearing, “Design of a piezoelectric-based structural health monitoring system for damage detection in composite material,” Proceedings of SPIE, 86 (2005), Paper No. 4701.
[7]	H. Sato, Y. Shimojo, and T. Sekiya, “Lead zirconate titanate fiber, smart board using lead zirconate titanate fiber, actuator utilizing smart board, and sensor utilizing smart board,” US patent, US6963157 B2 (2005).
[8]	J. Qiu, J. Tani, N. Yamada, and H. Takahashi, “Fabrication of piezoelectric fibers with metal core,” Proceedings of. SPIE, Smart Structures and Materials 2003: Active Materials: Behavior and Mechanics (2003), Paper No. 5053.
[9]	H. Sato, T. Sekiya and M. Nagamine, “Design of the metal-core piezoelectric fiber,” Proceedings of SPIE, Smart Structures and Materials 2004: Smart Structures and Integrated Systems (2004), Paper No. 5390.
[10]	H. Sato and M. Nagamine, “Mechanical properties of metal-core piezoelectric fiber,” Proceedings of SPIE, Smart Structures and Materials 2005: Smart Structures and Integrated Systems (2005), Paper No. 5764.
[11]	H. Asanuma, “Development of metal-based smart composites,” JOM, Vol. 52, No. 10 (2000), pp. 21-25.
[12]	H. Asanuma, N. Takeda, T. Chiba and H. Sato, “Fabrication of metal core piezoelectric fiber/aluminum composite material,” Nippon Kikai Gakkai (The Japan Society of Mechanical Engineers), Collection of papers of 14th Mechanical material and material processing technology lecture meeting (2006), pp. 21-22.
[13]	H. Asanuma and H. Sato, “Functional composite material equipped with embedded piezoelectric fiber with metal core,” Chiba University, National Institute of Advanced Industrial Science and Technology, Japanese Patent No. 4719897.
[14]	D. Askari, R. Ruth, H. Asanuma and M. N. Gasemi-Nejhad, “A comparative study on macrofiber composites and active fiber composites with metal-core piezoelectric actuators/sensors,” Proceedings of SPIE, Smart Structures and Materials 2006: Active Materials: Behavior and Mechanics (2006), Paper No. 6170.
[15]	H. Asanuma, J. Kunikata and M. Kibe, “Development of multifunctional structural material systems by innovative design and processing,” Materials Research Society Symposium Proceedings, Vol. 1129 (2009), pp. 251-262.
[16]	M. Richeson, U. Erturun, R. Waxman, K. Mossi, J. Kunikata and H. Asanuma, “Characterization of a Pt-core PZT fiber/Al matrix composite”, Proceedings of SPIE, Behavior and Mechanics of Multifunctional Materials and Composites 2010 (2010), Paper No. 7644.
[17]	T. Yanaseko, H. Asanuma, H. Sato, “Characterization of a metal-core piezoelectric ceramics fiber/aluminum composite,” Mechanical Engineering Journal, 2, 2 (2015), pp. 1-8.
[18]	X. Zhao, H. Gao, G. Zhang, B. Ayhan, Y. Yan, C. Kwan, J. L. Rose, “Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring,” Smart Materials and Structures, 16 (2007), pp. 1208-1217.
[19]	M. Lehmann, A. Büter, B. Frankenstein, F. Schubert, B. Brunner, “Monitoring System for Delamination Detection – Qualification of Structural Health Monitoring (SHM) Systems,” Conference on Damage in Composite Material CDCM 2006, Stuttgart, September 2006.

Cite This Article

Plain Text BibTeX RIS

APA Style

Tetsuro Yanaseko, Hiroshi Asanuma, Hiroshi Sato. (2015). Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites. International Journal of Materials Science and Applications, 4(4), 256-260. https://doi.org/10.11648/j.ijmsa.20150404.15

Copy | Download

ACS Style

Tetsuro Yanaseko; Hiroshi Asanuma; Hiroshi Sato. Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites. Int. J. Mater. Sci. Appl. 2015, 4(4), 256-260. doi: 10.11648/j.ijmsa.20150404.15

Copy | Download

AMA Style

Tetsuro Yanaseko, Hiroshi Asanuma, Hiroshi Sato. Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites. Int J Mater Sci Appl. 2015;4(4):256-260. doi: 10.11648/j.ijmsa.20150404.15

Copy | Download

@article{10.11648/j.ijmsa.20150404.15,
  author = {Tetsuro Yanaseko and Hiroshi Asanuma and Hiroshi Sato},
  title = {Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites},
  journal = {International Journal of Materials Science and Applications},
  volume = {4},
  number = {4},
  pages = {256-260},
  doi = {10.11648/j.ijmsa.20150404.15},
  url = {https://doi.org/10.11648/j.ijmsa.20150404.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20150404.15},
  abstract = {This paper describes the detection of an impact location by using anisotropy of the output voltage of a metal-core piezoelectric ceramic fiber/aluminum composite. Metal-core piezoelectric ceramic fibers are very fragile. The mechanical properties of metal-core piezoelectric ceramic fibers can be improved by embedding the fibers into the metals that have excellent reliability and strength. Therefore, metal-core piezoelectric ceramic fiber/aluminum composites were developed by using the Interphase Forming/Bonding method. Furthermore, the output voltage characteristics of fabricated a composite were evaluated, and the anisotropy of the output voltage was observed. In this study, the impact location detection system was developed by using the anisotropy of the output voltage of the composite. It is expected to reduce the number of sensors compared with conventional systems while maintaining the accuracy. As a result, the impact location detection was successfully developed by using the model of the output voltage of the composites that were disposed in two different positions to obtain the signals.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites
AU  - Tetsuro Yanaseko
AU  - Hiroshi Asanuma
AU  - Hiroshi Sato
Y1  - 2015/07/04
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmsa.20150404.15
DO  - 10.11648/j.ijmsa.20150404.15
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 256
EP  - 260
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20150404.15
AB  - This paper describes the detection of an impact location by using anisotropy of the output voltage of a metal-core piezoelectric ceramic fiber/aluminum composite. Metal-core piezoelectric ceramic fibers are very fragile. The mechanical properties of metal-core piezoelectric ceramic fibers can be improved by embedding the fibers into the metals that have excellent reliability and strength. Therefore, metal-core piezoelectric ceramic fiber/aluminum composites were developed by using the Interphase Forming/Bonding method. Furthermore, the output voltage characteristics of fabricated a composite were evaluated, and the anisotropy of the output voltage was observed. In this study, the impact location detection system was developed by using the anisotropy of the output voltage of the composite. It is expected to reduce the number of sensors compared with conventional systems while maintaining the accuracy. As a result, the impact location detection was successfully developed by using the model of the output voltage of the composites that were disposed in two different positions to obtain the signals.
VL  - 4
IS  - 4
ER  -

Copy | Download

Author Information

Tetsuro Yanaseko

Division of Material Science and Engineering, Yokohama National University, Yokohama, Japan
Hiroshi Asanuma

Department of Mechanical Engineering, Chiba University, Chiba, Japan
Hiroshi Sato

National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Tetsuro Yanaseko, Hiroshi Asanuma, Hiroshi Sato. (2015). Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites. International Journal of Materials Science and Applications, 4(4), 256-260. https://doi.org/10.11648/j.ijmsa.20150404.15

Copy | Download

ACS Style

Tetsuro Yanaseko; Hiroshi Asanuma; Hiroshi Sato. Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites. Int. J. Mater. Sci. Appl. 2015, 4(4), 256-260. doi: 10.11648/j.ijmsa.20150404.15

Copy | Download

AMA Style

Tetsuro Yanaseko, Hiroshi Asanuma, Hiroshi Sato. Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites. Int J Mater Sci Appl. 2015;4(4):256-260. doi: 10.11648/j.ijmsa.20150404.15

Copy | Download

@article{10.11648/j.ijmsa.20150404.15,
  author = {Tetsuro Yanaseko and Hiroshi Asanuma and Hiroshi Sato},
  title = {Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites},
  journal = {International Journal of Materials Science and Applications},
  volume = {4},
  number = {4},
  pages = {256-260},
  doi = {10.11648/j.ijmsa.20150404.15},
  url = {https://doi.org/10.11648/j.ijmsa.20150404.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20150404.15},
  abstract = {This paper describes the detection of an impact location by using anisotropy of the output voltage of a metal-core piezoelectric ceramic fiber/aluminum composite. Metal-core piezoelectric ceramic fibers are very fragile. The mechanical properties of metal-core piezoelectric ceramic fibers can be improved by embedding the fibers into the metals that have excellent reliability and strength. Therefore, metal-core piezoelectric ceramic fiber/aluminum composites were developed by using the Interphase Forming/Bonding method. Furthermore, the output voltage characteristics of fabricated a composite were evaluated, and the anisotropy of the output voltage was observed. In this study, the impact location detection system was developed by using the anisotropy of the output voltage of the composite. It is expected to reduce the number of sensors compared with conventional systems while maintaining the accuracy. As a result, the impact location detection was successfully developed by using the model of the output voltage of the composites that were disposed in two different positions to obtain the signals.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Detection of Impact Location by Using Anisotropy of Output Voltage of Metal-Core Piezoelectric Fiber/Aluminum Composites
AU  - Tetsuro Yanaseko
AU  - Hiroshi Asanuma
AU  - Hiroshi Sato
Y1  - 2015/07/04
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmsa.20150404.15
DO  - 10.11648/j.ijmsa.20150404.15
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 256
EP  - 260
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20150404.15
AB  - This paper describes the detection of an impact location by using anisotropy of the output voltage of a metal-core piezoelectric ceramic fiber/aluminum composite. Metal-core piezoelectric ceramic fibers are very fragile. The mechanical properties of metal-core piezoelectric ceramic fibers can be improved by embedding the fibers into the metals that have excellent reliability and strength. Therefore, metal-core piezoelectric ceramic fiber/aluminum composites were developed by using the Interphase Forming/Bonding method. Furthermore, the output voltage characteristics of fabricated a composite were evaluated, and the anisotropy of the output voltage was observed. In this study, the impact location detection system was developed by using the anisotropy of the output voltage of the composite. It is expected to reduce the number of sensors compared with conventional systems while maintaining the accuracy. As a result, the impact location detection was successfully developed by using the model of the output voltage of the composites that were disposed in two different positions to obtain the signals.
VL  - 4
IS  - 4
ER  -

Copy | Download