| Peer-Reviewed

The Study of Electrical Grid Components After Installing a 10 MW Photovoltaic Power Plant with Large-Scale Batteries at Peak Load by DigSilent Software

Received: 15 September 2022     Accepted: 18 October 2022     Published: 27 October 2022
Views:       Downloads:
Abstract

Taking into mind the plans and feasible targets for installing renewable power plants, particularly solar farms in Iran, and the fact that the energy generated by these power plants during the day and at different periods of the year is variable, sudden events such as a fall or increase in demand, as well as changes in grid components, should be taken into account when evaluating these power plants. Controlling the slope of the duck curve and grid components will rely heavily on energy storage. As a result, one of the most recent options proposed by top corporations is the use of large-scale batteries. The increase in peak load is one of the issues that will develop in Iran in the future. Given the abundance of 10 MW solar power plants in Iran, this article attempts to demonstrate the effect of installing a large-scale battery in a 10 MW photovoltaic power plant on power grid performance By DigSilent software. Finally, the grid's power quality components are examined. The effect of installing a large-scale battery in a 10 MW photovoltaic power plant on power grid performance was explored in this article utilizing DigSilent software. Some parameters such as Maximum power generation of the plant with storage, AC Loss, Maximum power injection with storage, Operation coefficient of the upstream station, and Voltage of the 20kv bus of the upstream station, have been calculated.

Published in American Journal of Electrical Power and Energy Systems (Volume 11, Issue 5)
DOI 10.11648/j.epes.20221105.12
Page(s) 97-107
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Renewable Energy, Duck Curve, DigSilent Software, Power Quality, Battery

References
[1] International Energy Agency (2018).
[2] M. Combe, A. Mahmoudi, M. H. Haque, R. Khezri; Cost effective sizing of an AC mini-grid hybrid power system for a remote area in South Australia; IET Gener, Transm Distrib, 13 (2) (2019), pp. 277-287.
[3] Parhamfar, Mohammad; Adeli, Amir Mohammad; Mousavi, Shahin; Large-scale renewable energy storage systems: Review on the social benefits and services of entering the electricity market; The 6th National Conference of Electrical Engineering and Intelligent Systems; Islamic Azad University, Najaf-Abad Branch; June 2022.
[4] Parhamfar, Mohammad; Adeli, Amir Mohammad; Mousavi, Shahin; An review on energy storage technologies and their integration with renewable energy sources in microgrids; The 6th National Conference of Electrical Engineering and Intelligent Systems; Islamic Azad University, Najaf-Abad Branch; June 2022.
[5] Lucia Fagiolari, Matteo Sampò, Andrea Lamberti, Julia Amicia, Carlotta Francia, Silvia Bodoardo, Federico Bella; Integrated energy conversion and storage devices: Interfacing solar cells, batteries and supercapacitors; Energy Storage Materials; Volume 51, October 2022, Pages 400-434.
[6] Yi Zhang, Hexu Sun, Jianxin Tan, Zheng Li, Weimin Hou, Yingjun Guo; Capacity configuration optimization of multi-energy system integrating wind turbine/photovoltaic/hydrogen/battery; Energy; Volume 252, 1 August 2022, 124046.
[7] Rahmat Khezri, Amin Mahmoudi, Hirohisa Akib; Optimal planning of solar photovoltaic and battery storage systems for grid-connected residential sector: Review, challenges and new perspectives; Renewable and Sustainable Energy Reviews, Volume 153, January 2022, 111763.
[8] El Chaar L, Lamont LA, El Zein N. Review of photovoltaic technologies. Renew Sustain Energy Rev 2011; 15: 2165e75. https://doi.org/10.1016/j.rser.2011.01.004.
[9] Djoudi Gherbi A, Hadj Arab A, Salhi H. Improvement and validation of PV motor-pump model for PV pumping system performance analysis. Sol Energy 2017; 144: 310e20. https://doi.org/10.1016/j.solener.2016.12.042.
[10] Tiwari AK, Kalamkar VR. Effects of total head and solar radiation on the performance of solar water pumping system. Renew Energy 2018; 118: 919e27. https://doi.org/10.1016/j.renene.2017.11.004.
[11] Nguyen Duc T, Goshome K, Endo N, Maeda T. Optimization strategy for high efficiency 20 kW-class direct coupled photovoltaic-electrolyzer system based on experiment data. Int J Hydrogen Energy 2019; 44: 26741e52. https://doi.org/10.1016/j.ijhydene.2019.07.056.
[12] Jafari M, Armaghan D, Seyed Mahmoudi SM, Chitsaz A. Thermoeconomic analysis of a standalone solar hydrogen system with hybrid energy storage. Int J Hydrogen Energy 2019; 44: 19614e27. https://doi.org/10.1016/j.ijhydene.2019.05.195.
[13] Zheng Y, Ouyang M, Han X, Lu L, Li J. Investigating the error sources of the online state of charge estimation methods for lithium ion batteries in electric vehicles. J Power Sources 2018; 377: 161e88. https://doi.org/10.1016/j.jpowsour.2017.11.094.
[14] Tang X, Wang Y, Yao K, He Z, Gao F. Model migration based battery power capability evaluation considering uncertainties of temperature and aging. J Power Sources 2019; 440: 227141. https://doi.org/10.1016/ j.jpowsour.2019.227141.
[15] Bhadra S, Hsieh AG, Wang MJ, Hertzberg BJ, Steingart DA. Anode characterization in zinc-manganese dioxide AA alkaline batteries using electrochemical-acoustic time-of-flight analysis. J Electrochem Soc 2016; 163: A1050e6. https://doi.org/10.1149/2.1201606jes.
[16] Ling R, Wang L, Huang X, Dan Q, Zhang J. A review of equalization topologies for lithium-ion battery packs. Chin Control Conf 2015. https://doi.org/10.1109/ChiCC.2015.7260899.2015eSepte:7922e7.
[17] Ling Z, Zhang Z, Shi G, Fang X, Wang L, Gao X, et al. Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules. Renew Sustain Energy Rev 2014; 31: 427e38. https://doi.org/10.1016/j.rser.2013.12.017.
Cite This Article
  • APA Style

    Mohammad Parhamfar, Amir Mohammad Adeli. (2022). The Study of Electrical Grid Components After Installing a 10 MW Photovoltaic Power Plant with Large-Scale Batteries at Peak Load by DigSilent Software. American Journal of Electrical Power and Energy Systems, 11(5), 97-107. https://doi.org/10.11648/j.epes.20221105.12

    Copy | Download

    ACS Style

    Mohammad Parhamfar; Amir Mohammad Adeli. The Study of Electrical Grid Components After Installing a 10 MW Photovoltaic Power Plant with Large-Scale Batteries at Peak Load by DigSilent Software. Am. J. Electr. Power Energy Syst. 2022, 11(5), 97-107. doi: 10.11648/j.epes.20221105.12

    Copy | Download

    AMA Style

    Mohammad Parhamfar, Amir Mohammad Adeli. The Study of Electrical Grid Components After Installing a 10 MW Photovoltaic Power Plant with Large-Scale Batteries at Peak Load by DigSilent Software. Am J Electr Power Energy Syst. 2022;11(5):97-107. doi: 10.11648/j.epes.20221105.12

    Copy | Download

  • @article{10.11648/j.epes.20221105.12,
      author = {Mohammad Parhamfar and Amir Mohammad Adeli},
      title = {The Study of Electrical Grid Components After Installing a 10 MW Photovoltaic Power Plant with Large-Scale Batteries at Peak Load by DigSilent Software},
      journal = {American Journal of Electrical Power and Energy Systems},
      volume = {11},
      number = {5},
      pages = {97-107},
      doi = {10.11648/j.epes.20221105.12},
      url = {https://doi.org/10.11648/j.epes.20221105.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20221105.12},
      abstract = {Taking into mind the plans and feasible targets for installing renewable power plants, particularly solar farms in Iran, and the fact that the energy generated by these power plants during the day and at different periods of the year is variable, sudden events such as a fall or increase in demand, as well as changes in grid components, should be taken into account when evaluating these power plants. Controlling the slope of the duck curve and grid components will rely heavily on energy storage. As a result, one of the most recent options proposed by top corporations is the use of large-scale batteries. The increase in peak load is one of the issues that will develop in Iran in the future. Given the abundance of 10 MW solar power plants in Iran, this article attempts to demonstrate the effect of installing a large-scale battery in a 10 MW photovoltaic power plant on power grid performance By DigSilent software. Finally, the grid's power quality components are examined. The effect of installing a large-scale battery in a 10 MW photovoltaic power plant on power grid performance was explored in this article utilizing DigSilent software. Some parameters such as Maximum power generation of the plant with storage, AC Loss, Maximum power injection with storage, Operation coefficient of the upstream station, and Voltage of the 20kv bus of the upstream station, have been calculated.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Study of Electrical Grid Components After Installing a 10 MW Photovoltaic Power Plant with Large-Scale Batteries at Peak Load by DigSilent Software
    AU  - Mohammad Parhamfar
    AU  - Amir Mohammad Adeli
    Y1  - 2022/10/27
    PY  - 2022
    N1  - https://doi.org/10.11648/j.epes.20221105.12
    DO  - 10.11648/j.epes.20221105.12
    T2  - American Journal of Electrical Power and Energy Systems
    JF  - American Journal of Electrical Power and Energy Systems
    JO  - American Journal of Electrical Power and Energy Systems
    SP  - 97
    EP  - 107
    PB  - Science Publishing Group
    SN  - 2326-9200
    UR  - https://doi.org/10.11648/j.epes.20221105.12
    AB  - Taking into mind the plans and feasible targets for installing renewable power plants, particularly solar farms in Iran, and the fact that the energy generated by these power plants during the day and at different periods of the year is variable, sudden events such as a fall or increase in demand, as well as changes in grid components, should be taken into account when evaluating these power plants. Controlling the slope of the duck curve and grid components will rely heavily on energy storage. As a result, one of the most recent options proposed by top corporations is the use of large-scale batteries. The increase in peak load is one of the issues that will develop in Iran in the future. Given the abundance of 10 MW solar power plants in Iran, this article attempts to demonstrate the effect of installing a large-scale battery in a 10 MW photovoltaic power plant on power grid performance By DigSilent software. Finally, the grid's power quality components are examined. The effect of installing a large-scale battery in a 10 MW photovoltaic power plant on power grid performance was explored in this article utilizing DigSilent software. Some parameters such as Maximum power generation of the plant with storage, AC Loss, Maximum power injection with storage, Operation coefficient of the upstream station, and Voltage of the 20kv bus of the upstream station, have been calculated.
    VL  - 11
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Business Management, MSc in Renewable Energy, Electrical and Energy Industry Advisor, Isfahan, Iran

  • Planning and Management of Electrical Energy Systems, Shahid Beheshti University, Tehran, Iran

  • Sections