Use of natural material for development of sound absorbers received considerable significance since in past few years. Natural materials are preferred due to their ease of availability, low environmental impact, distinctive internal structure and reusability. One such natural material Peanut shell is made up of natural cellulose fibers and has good internal pores which can be utilized for sound absorption application. In the current study samples of Peanut shell specimens were made of 100mm diameter having different material to binder weight ratios. The test specimens were made with thickness 10mm, 15mm, 20mm, 25mm, 30mm, 35mm and 40mm respectively. Normal incidence sound absorption coefficient for the specimens is measured using ASTM E1050-98 (Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones, and a Digital Frequency Analysis System) and values of the normal incidence sound absorption are compared with values obtained using Delany and Bazley Model. It was observed that Peanut shell test specimen with material to binder weight ratio 70:30 gives optimum average sound absorption for frequency range between 250Hz to 4500Hz. The current paper concludes that Peanut shell can prove to be good alternative natural material over existing conventional sound absorbing materials for application in field of sound absorption.
Published in | American Journal of Mechanical and Materials Engineering (Volume 3, Issue 3) |
DOI | 10.11648/j.ajmme.20190303.12 |
Page(s) | 53-60 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2019. Published by Science Publishing Group |
Acoustics, Impedance Tube, Noise, Peanut Shell, Sound Absorption Coefficient, Natural Fibers
[1] | Hasina Mamtaz, Mohammad Hosseini Fouladi, Mohd Zaki Nuawi, Satesh Narayana Namasivayam, Masomeh Ghassem, Mushtak Al-Atabi, Acoustic absorption of fibro-granular composite with cylindrical grains, Applied acoustics 126, 2017, pp 58-67. |
[2] | Zhengqing Liu, Jiaxing Zhan, Mohammad Fard, John Laurence Davy, Acoustic properties of multilayer sound absorbers with a 3D printed micro-perforated panel, Applied acoustics 121, 2017, pp 25-32. |
[3] | C. Arenas, C. Leiva, L. F. Vilches, J. A. González Ganso, Approaching a methodology for the development of a multilayer sound absorbing device recycling coal bottom ash, Applied acoustics 115, 2017, pp 81-87. |
[4] | Farhad Forouharmajd, Zahra Mohammadi, Assessment of normal incidence absorption performance of sound absorbing materials, International Journal of Environmental Health Engineering 1, 2017, 1-9. |
[5] | Khai Hee Or, Azma Putra, Mohd Zulkefli Selamat, Oil palm empty fruit bunch fibres as sustainable acoustic absorber, Applied acoustics 119, 2017, pp 09-16. |
[6] | B. Botterman, G. C. H. Doudart de la Grée, M. C. J. Hornikx, Q. L. Yu, H. J. H. Brouwers, Modelling and optimization of the sound absorption of wood-wool cement boards, Applied acoustics 129, 2017, pp 144-154. |
[7] | Mathan Sambu, Musli Nizamyahya, Hanif Abdul Latif, Mohamed Nasrul Mohamed Hatta and Mohd Imran Bin Ghazali, Acoustic Performance and physical properties of nonwoven fiber; Aregna Pinnata (Ijuk) And Natural Rubber composite, ARPN Journal of Engineering and Applied Sciences 11, 2016, pp 13292-13299. |
[8] | Hasina Mamtaz, Mohammad Hosseini Fouladi, Mushtak Al-Atabi, and Satesh Narayana Namasivayam, Acoustic Absorption of Natural Fiber Composites, Hindawi Publishing Corporation Journal of Engineering Volume 2016, pp 1-11. |
[9] | Ancuţa-Elena Tiuca, Horaţiu Vermeşana, Timea Gabora, Ovidiu Vasileb, Improved sound absorption properties of polyurethane foam mixed with textile waste, Sustainable Solutions for Energy and Environment, EENVIRO-YRC 2015, pp 18-20. |
[10] | Cinzia Burattia, Elisa Bellonia, Elisa Lascarob, Giovanna Anna Lopez, Paola Ricciardic, Sustainable panels with recycled materials for building applications: environmental and acoustic characterization, 71st Conference of the Italian Thermal Machines Engineering Association, ATI2016, pp 14-16. |
[11] | Daniela Bosnia, Lorenzo Savioa, Francesca Thiebata, Alessia Patruccob, Stefano Fantuccic, Gabriele Piccablottoa, Donatella Marinoa, Sheep Wool for Sustainable Architecture, Energy Procedia 78, 2015, pp 315-320. |
[12] | M. T. Fadzlita, K. B. Yeo, W. H. Choong, M. Melvin, Absorption coefficient of acoustic coir fiber panel and effects of varying percentages of perforated plates, journal of applied sciences 14, 2014, pp 3106-3109. |
[13] | K. Elwaleed, N. Nikabdullah, M. J. M. Nor, M. F. M. Tahir, M. Z. Nuawi and Y. A. Abakr, Experimental Study on the Effect of Compression on the Sound Absorption of Date Palm Fibers, World Applied Sciences Journal 31, 2014, pp 40-44. |
[14] | Tu-Cheng Hung, Jong-Shin Huang, Yi-Wen Wang, Kuei-Yi Lin, Inorganic Polymeric Foam as a sound absorbing and insulating material, Construction and Building Materials 50, pp2014, pp 328–334. |
[15] | Hai-fan Xianga, Dong Wanga, Hui-chao Liua, Ning Zhaoa and Jian Xua, Investigation on sound absorption properties of kapok fibers, Chinese Journal of Polymer Science 31, 2013, pp 521−529. |
[16] | Lamyaa Abd ALRahman, Raja Ishak Raja and Roslan Abdul Rahman, Experimental study on Natural Fibers for Green Acoustic Absorbing Materials, American Journal of Applied Sciences 10, 2013, pp 1307-1314. |
[17] | Sezgin Ersoy, Haluk Ku¨cu¨k, Investigation of industrial tea leaf fibre waste material for its sound absorption properties, Applied Acoustics 70, 2009, pp 215-220. |
APA Style
Ulhas Arun Malawade, Madhavrao Ganpatrao Jadhav. (2019). Investigation of Peanut Shell as Alternative Sound Absorbing Material. American Journal of Mechanical and Materials Engineering, 3(3), 53-60. https://doi.org/10.11648/j.ajmme.20190303.12
ACS Style
Ulhas Arun Malawade; Madhavrao Ganpatrao Jadhav. Investigation of Peanut Shell as Alternative Sound Absorbing Material. Am. J. Mech. Mater. Eng. 2019, 3(3), 53-60. doi: 10.11648/j.ajmme.20190303.12
AMA Style
Ulhas Arun Malawade, Madhavrao Ganpatrao Jadhav. Investigation of Peanut Shell as Alternative Sound Absorbing Material. Am J Mech Mater Eng. 2019;3(3):53-60. doi: 10.11648/j.ajmme.20190303.12
@article{10.11648/j.ajmme.20190303.12, author = {Ulhas Arun Malawade and Madhavrao Ganpatrao Jadhav}, title = {Investigation of Peanut Shell as Alternative Sound Absorbing Material}, journal = {American Journal of Mechanical and Materials Engineering}, volume = {3}, number = {3}, pages = {53-60}, doi = {10.11648/j.ajmme.20190303.12}, url = {https://doi.org/10.11648/j.ajmme.20190303.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmme.20190303.12}, abstract = {Use of natural material for development of sound absorbers received considerable significance since in past few years. Natural materials are preferred due to their ease of availability, low environmental impact, distinctive internal structure and reusability. One such natural material Peanut shell is made up of natural cellulose fibers and has good internal pores which can be utilized for sound absorption application. In the current study samples of Peanut shell specimens were made of 100mm diameter having different material to binder weight ratios. The test specimens were made with thickness 10mm, 15mm, 20mm, 25mm, 30mm, 35mm and 40mm respectively. Normal incidence sound absorption coefficient for the specimens is measured using ASTM E1050-98 (Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones, and a Digital Frequency Analysis System) and values of the normal incidence sound absorption are compared with values obtained using Delany and Bazley Model. It was observed that Peanut shell test specimen with material to binder weight ratio 70:30 gives optimum average sound absorption for frequency range between 250Hz to 4500Hz. The current paper concludes that Peanut shell can prove to be good alternative natural material over existing conventional sound absorbing materials for application in field of sound absorption.}, year = {2019} }
TY - JOUR T1 - Investigation of Peanut Shell as Alternative Sound Absorbing Material AU - Ulhas Arun Malawade AU - Madhavrao Ganpatrao Jadhav Y1 - 2019/09/05 PY - 2019 N1 - https://doi.org/10.11648/j.ajmme.20190303.12 DO - 10.11648/j.ajmme.20190303.12 T2 - American Journal of Mechanical and Materials Engineering JF - American Journal of Mechanical and Materials Engineering JO - American Journal of Mechanical and Materials Engineering SP - 53 EP - 60 PB - Science Publishing Group SN - 2639-9652 UR - https://doi.org/10.11648/j.ajmme.20190303.12 AB - Use of natural material for development of sound absorbers received considerable significance since in past few years. Natural materials are preferred due to their ease of availability, low environmental impact, distinctive internal structure and reusability. One such natural material Peanut shell is made up of natural cellulose fibers and has good internal pores which can be utilized for sound absorption application. In the current study samples of Peanut shell specimens were made of 100mm diameter having different material to binder weight ratios. The test specimens were made with thickness 10mm, 15mm, 20mm, 25mm, 30mm, 35mm and 40mm respectively. Normal incidence sound absorption coefficient for the specimens is measured using ASTM E1050-98 (Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones, and a Digital Frequency Analysis System) and values of the normal incidence sound absorption are compared with values obtained using Delany and Bazley Model. It was observed that Peanut shell test specimen with material to binder weight ratio 70:30 gives optimum average sound absorption for frequency range between 250Hz to 4500Hz. The current paper concludes that Peanut shell can prove to be good alternative natural material over existing conventional sound absorbing materials for application in field of sound absorption. VL - 3 IS - 3 ER -